Dürkopp Adler 1220-6 Service Instructions

Dürkopp Adler 1220-6 Sewing Machine manual cover

Pages 35

Year 2002

Language(s)

of 35

Dürkopp Adler 1220-6 Sewing Machine Specification

The Dürkopp Adler 1220-6 Sewing Machine is a high-performance industrial sewing machine designed for precision and efficiency in garment manufacturing. This model features a robust construction that ensures durability and reliability under continuous operation. It is equipped with a direct drive motor, offering energy-efficient performance while minimizing noise and vibration levels for a more comfortable working environment. The machine supports a maximum sewing speed of 5,000 stitches per minute, providing rapid throughput for high-volume production settings.

The 1220-6 model is engineered with an advanced thread trimming mechanism, allowing for clean and accurate cuts, thereby reducing manual intervention and enhancing productivity. Its automatic needle positioning system ensures precise stitching, enhancing the quality of the finished product. The machine accommodates a wide range of fabrics, from lightweight materials to heavier textiles, thanks to its adjustable presser foot pressure and feed mechanism, which can be fine-tuned according to material thickness and texture.

For ease of use, the Dürkopp Adler 1220-6 features an intuitive control panel that simplifies the selection of stitch patterns and machine settings. The ergonomic design of the machine facilitates operator comfort during prolonged use, reducing fatigue. Additionally, the machine is equipped with a built-in LED lighting system, providing ample illumination to the working area for accurate stitching, even in low-light conditions.

Maintenance of the 1220-6 is straightforward, with easily accessible components and a comprehensive user manual to guide routine servicing. This model is designed to meet the rigorous demands of modern textile production, combining cutting-edge technology with proven engineering to deliver exceptional performance and reliability.

Dürkopp Adler 1220-6 Sewing Machine F.A.Q.

How do I thread the Dürkopp Adler 1220-6 sewing machine?

To thread the Dürkopp Adler 1220-6, start by placing the spool on the spool pin. Then, guide the thread through the thread guide, down through the tension discs, and up through the take-up lever. Finally, thread the needle from front to back.

What should I do if the machine is skipping stitches?

If the machine is skipping stitches, check the needle to ensure it is not bent or dull. Also, make sure the needle is inserted correctly and the thread tension is properly adjusted.

How can I adjust the tension on the Dürkopp Adler 1220-6?

To adjust the tension, use the tension dial located on the front of the machine. Turn it clockwise to increase tension and counterclockwise to decrease tension. Test on a scrap piece of fabric to ensure proper tension.

What is the correct way to clean and maintain the sewing machine?

Regular maintenance includes dusting the machine and oiling the moving parts. Use a soft brush to remove lint and follow the manufacturer's guidelines to apply sewing machine oil at designated points.

Why is the fabric not feeding properly through the machine?

Ensure the feed dogs are engaged and not lowered. Also, check that the presser foot is down and applying adequate pressure on the fabric. Adjust the presser foot pressure if necessary.

How do I change the needle on the Dürkopp Adler 1220-6?

To change the needle, first turn off the machine and remove the presser foot. Loosen the needle clamp screw and remove the old needle. Insert a new needle with the flat side facing the back and tighten the clamp screw.

What steps should I take if the machine motor is not running?

Check if the machine is plugged in and the power switch is turned on. Verify that the foot pedal is properly connected. If the problem persists, consult a professional technician to inspect the motor.

How can I fix a bobbin case that keeps jamming?

Ensure the bobbin is wound evenly and inserted correctly. Clean the bobbin case and surrounding area of any lint or thread debris. Reinsert the bobbin case properly.

What should I do if the machine is making unusual noises?

Unusual noises may indicate a need for cleaning or oiling. Turn off the machine and inspect for any loose screws or parts. If noises persist, consult the manual or a technician.

How do I set up the machine for sewing different types of fabric?

Adjust the needle type and size according to the fabric. Modify the thread tension and presser foot pressure to accommodate thicker or thinner materials. Conduct a test stitch on a scrap piece of fabric for best results.