Contents

1 Komponenten des Teilesatzes
- Der Teilesatz besteht aus folgenden Bauteilen:
2 Stichplatte, Hpferfu und Schieber tauschen
- Abb. 1
3 Kantenfhrung montieren
- 3.1 Fhrungsschiene auf der Grundplatte montieren
  - Abb. 2
  - Abb. 3
- 3.2 Leitungen anschlieen
  - 3.2.1 Signalleitung anschlieen
    - Abb. 4
    - Abb. 5
    - Abb. 6
    - Abb. 7
- 3.2.2 Spannungsversorgung anschlieen
  - Abb. 8
  - Abb. 9
  - 3.3 Kantensteuerung voreinstellen
    - Abb. 10
    - Abb. 11
    - Abb. 12
  - 3.4 Kantensteuerung im Programm aktivieren
    - Abb. 13
    - Abb. 14
  - 3.5 Induktivgeber einstellen
    - Abb. 15
    - Abb. 16
  - 3.6 Lichtschranke einstellen
    - Abb. 17
    - Die Werte 1 verndern sich, wenn der Lichtschranken Messbereich abgedeckt wird.
- 3.6.1 Lichtschranke in Nhrichtung einstellen
  - Abb. 18
  - Abb. 19
  - Der Messbereich der Lichtschranke soll auf Hhe der Nadel liegen.
- 3.6.2 Neigung der Lichtschranke einstellen
  - Abb. 20
  - Abb. 21
  - Der Erfassungsbereich der Lichtschranke 1 soll an der linken Kante der Reflexfolie am Schieber 2 beginnen.
  - 3.7 Kantenoffset ermittel und in der Steuerung eingeben
    - Abb. 22
    - Abb. 23
    - Abb. 24
  - 1 Kit Components
    - The kit consists of the following components:
  - 2 Replacing the throat plate, skipping foot and the slide
    - Fig. 1
  - 3 Mounting the edge guide
    - 3.1 Mounting the guide rail on the base plate
      - Fig. 2
      - Fig. 3
    - 3.2 Connecting the cables
      - 3.2.1 Connecting the signal line
        
        Fig. 4
        
        Fig. 5
        
        Fig. 6
        
        Fig. 7
- 3.2.2 Connecting the power supply
  - Fig. 8
  - Fig. 9
  - 3.3 Pre-setting the edge regulator
    - Fig. 10
    - Fig. 11
    - Fig. 12
  - 3.4 Activating the edge regulator in the software
    - Fig. 13
    - Fig. 14
  - 3.5 Setting the inductive sensor
    - Fig. 15
    - Fig. 16
  - 3.6 Setting the light barrier
    - Fig. 17
    - If the measuring range of the light barrier is covered, the values 1 will change.
- 3.6.1 Setting the light barrier in the sewing direction
  - Fig. 18
  - Fig. 19
  - The measuring range of the light barrier should be at the level of the needle.
- 3.6.2 Setting the inclination of the light barrier
  - Fig. 20
  - Fig. 21
  - The coverage of the light barrier 1 should begin at the left edge of the reflective tape on the slider 2.
  - 3.7 Determining the edge offset and entering it in the control unit
    - Fig. 22
    - Fig. 23
    - Fig. 24

Dürkopp Adler 0867 590944 Edge Recognition Fitting Instructions

Dürkopp Adler 0867 590944 Edge Recognition Sewing Machine manual cover

Pages 24

Year 2011

Language(s)

of 24

Dürkopp Adler 0867 590944 Edge Recognition Sewing Machine Specification

The Dürkopp Adler 0867 590944 Edge Recognition Sewing Machine is an advanced industrial sewing solution designed to enhance precision and efficiency in garment production. This machine is equipped with cutting-edge edge recognition technology, enabling precise stitching along fabric edges, which is essential for high-quality finishing in apparel manufacturing. The machine boasts a robust construction, ensuring durability and reliability in high-demand environments.

It features a high-speed sewing capability, allowing for increased productivity without compromising stitch quality. The integrated edge recognition system utilizes sophisticated sensors to detect fabric edges accurately, facilitating consistent and precise seam allowances. This technology minimizes manual intervention, reducing the potential for human error and enhancing overall operational efficiency.

The Dürkopp Adler 0867 590944 is compatible with a variety of fabrics, from lightweight materials to heavy-duty textiles, making it versatile for different sewing applications. It includes an intuitive control panel that allows operators to adjust settings effortlessly, ensuring optimal performance for specific tasks. The machine's ergonomic design contributes to user comfort, reducing fatigue during extended use.

Furthermore, this sewing machine is equipped with advanced safety features to protect operators and maintain a safe working environment. It supports various stitch patterns, providing flexibility in design and enabling creativity in garment construction. The Dürkopp Adler 0867 590944 stands out for its precision engineering, making it a valuable asset for manufacturers seeking to improve quality and efficiency in their sewing operations.

Dürkopp Adler 0867 590944 Edge Recognition Sewing Machine F.A.Q.

How do I properly thread the Dürkopp Adler 0867 sewing machine?

To thread the Dürkopp Adler 0867, start by placing the spool on the spool pin. Pull the thread through the thread guide and tension discs, then through the take-up lever. Finally, thread the needle from front to back. Always follow the threading diagram in the user manual for best results.

What should I do if the sewing machine is not stitching properly?

If the machine is not stitching properly, check the needle for damage or incorrect insertion. Ensure that the thread is correctly threaded through all guides and tension discs. Re-thread if necessary and check the bobbin for tangles. Adjust the tension settings if needed.

How can I troubleshoot tension issues on my Dürkopp Adler 0867?

To troubleshoot tension issues, first check that the machine is threaded correctly. Adjust the upper tension dial slightly and test on a scrap piece of fabric. Ensure the bobbin is wound evenly and inserted correctly. Clean the tension discs to remove any lint or debris.

What maintenance is required to keep the Dürkopp Adler 0867 in good condition?

Regular maintenance includes cleaning lint from the bobbin area and feed dogs, oiling designated points as specified in the manual, and checking for worn parts. Schedule professional servicing periodically for thorough inspection and adjustments.

How do I perform edge recognition on the Dürkopp Adler 0867?

To perform edge recognition, ensure the machine is properly calibrated by following the setup instructions in the manual. Use the correct presser foot and adjust the machine settings to detect fabric edges accurately. Refer to the user guide for specific edge recognition settings.

What steps should I take if the needle breaks frequently?

Frequent needle breaks can be caused by incorrect needle size or type, improper needle insertion, or sewing heavy fabrics without the appropriate settings. Check and replace the needle, ensuring it is inserted correctly and use the correct needle for your fabric type.

How do I adjust the stitch length on the Dürkopp Adler 0867?

To adjust the stitch length, locate the stitch length dial on the machine. Turn the dial to increase or decrease the stitch length as needed. Test the settings on a scrap piece of fabric to ensure the desired stitch length is achieved.

What should I do if the machine is making unusual noises?

Unusual noises may indicate a need for maintenance. Check for loose screws, ensure the machine is oiled correctly, and inspect for thread tangles. If the noise persists, consult the manual or contact a professional technician for assistance.

How can I ensure even feeding of fabric on the Dürkopp Adler 0867?

Ensure even feeding of fabric by using the correct presser foot and adjusting the presser foot pressure. Check the feed dogs for proper operation and clean any lint or debris. Use a walking foot for thick or multi-layered fabrics to assist with even feeding.

What are common error codes on the Dürkopp Adler 0867 and how do I resolve them?

Common error codes include E6 (thread breakage) and E7 (motor error). For E6, check threading and needle condition. For E7, turn off the machine and restart. If errors persist, consult the manual for detailed troubleshooting steps.