Ducati Multistrada 950 2018 Owner's Manual
![Ducati Multistrada 950 2018 manual cover](/images/2090d9d3a85d0a5ffa9d4607/thumbs/thumb175x175.webp)
To check the oil level, place the motorcycle on a level surface and let the engine idle for a few minutes. Turn off the engine and wait for a couple of minutes. Check the oil level through the sight glass located on the lower right side of the engine. The oil level should be between the minimum and maximum marks.
The recommended tire pressure for the Ducati Multistrada 950 2018 is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold for an accurate reading.
To adjust the suspension, locate the adjusters on the front fork and rear shock. Use the adjuster knobs to change the preload, compression, and rebound damping settings according to your riding style and road conditions. Refer to the owner's manual for specific adjustment instructions.
Ducati recommends using a high-quality ethylene glycol-based coolant with corrosion inhibitors specifically for aluminum engines. It should meet the specifications outlined in the owner's manual.
To reset the service light, navigate through the instrument panel menu to the 'Service' option. Hold down the button for a few seconds until the light resets. If this does not work, a dealership visit may be required to reset it using diagnostic tools.
The correct chain tension should allow for 30-32 mm of slack at the midpoint of the chain. Adjust the chain tension using the adjusters on the rear swingarm. Ensure the motorcycle is on a rear stand or the side stand when checking and adjusting.
The air filter should be inspected every 7,500 miles and replaced if necessary. However, if you ride in dusty or harsh environments, consider checking and replacing it more frequently.
First, check the battery charge and connections. Ensure the kill switch is in the 'Run' position and the fuel valve is open. Check for any error codes on the display. If the issue persists, consult a Ducati technician for further diagnosis.
To change the headlight bulb, remove the headlight assembly by unscrewing the mounting screws. Disconnect the power connector and remove the old bulb. Install the new bulb, reconnect the power connector, and reattach the assembly. Ensure the bulb is correctly aligned.
The maintenance schedule includes regular checks and services every 7,500 miles or 12 months, whichever comes first. Key elements include oil changes, brake inspections, belt checks, and valve clearance inspections. Refer to the owner's manual for a detailed schedule.