Ducati Multistrada 1260 S 2019 Owner's Manual

To perform an oil change, warm up the engine, place the bike on a stand, remove the oil drain plug and let the oil drain completely. Replace the oil filter, reinstall the drain plug, and refill with the recommended oil type and quantity.
The recommended fuel for the Ducati Multistrada 1260 S 2019 is unleaded gasoline with an octane rating of at least 95 RON.
To adjust the suspension, access the electronic suspension settings through the bike's dashboard menu. You can select different pre-set modes or customize the settings for preload, damping, and other parameters.
The recommended tire pressure for the Ducati Multistrada 1260 S 2019 is typically 36 psi for the front tire and 42 psi for the rear tire. Check the owner's manual for specific recommendations.
Check the battery connection and charge, inspect the fuses, ensure the kill switch is off, and verify that the fuel is sufficient. If the problem persists, consult a Ducati service center.
Follow the maintenance schedule in the owner's manual, which includes regular oil and filter changes, chain lubrication, brake fluid checks, and valve clearance inspections at specific intervals.
To reset the service light, you typically need a Ducati diagnostic tool or to visit a Ducati service center. It cannot be reset manually without the proper equipment.
Clean the chain with a suitable chain cleaner and a soft brush, then lubricate it with a high-quality motorcycle chain lubricant. Do this every 500 miles or sooner if riding in wet conditions.
Improve fuel efficiency by maintaining proper tire pressure, using the recommended fuel, riding smoothly without rapid acceleration, and ensuring regular maintenance like air filter and spark plug checks.
If the bike overheats, pull over safely and turn off the engine. Check coolant levels once the engine cools, inspect for leaks, and ensure the radiator is not clogged. Consult a mechanic if the issue persists.