Dodge Viper SRT 2014 Owner's Manual

The recommended oil type for the 2014 Dodge Viper SRT is SAE 0W-40 full synthetic oil.
To reset the TPMS, ensure all tires are inflated to the recommended pressure, then drive the car above 15 mph for at least 10 minutes. The system should reset automatically.
For long-term storage, fill the fuel tank, change the oil, disconnect the battery, inflate the tires to the recommended pressure, and cover the car to protect it from dust and moisture.
To improve fuel efficiency, maintain proper tire pressure, ensure regular engine maintenance, avoid aggressive driving, and remove any unnecessary weight from the vehicle.
Common causes of overheating include low coolant levels, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. Regular inspections can help prevent these issues.
To change the air filter, locate the air filter housing, remove the cover, take out the old filter, and replace it with a new one. Ensure the cover is securely fastened.
The 2014 Dodge Viper SRT requires DOT 4 brake fluid. Regularly check the brake fluid level and replace it according to the maintenance schedule.
Check if the AC system has enough refrigerant, inspect the fuses and relays, ensure the compressor clutch is engaging, and look for any visible leaks in the system.
To replace the battery, disconnect the negative cable first, then the positive. Remove the battery hold-down bracket, swap the old battery with a new one, and reconnect the cables starting with the positive.
To prevent rust, regularly wash and wax your vehicle, especially after exposure to road salt or moisture. Consider applying a rust-proofing treatment and store the vehicle in a dry environment.