Dodge Journey 2012 User Manual
![Dodge Journey 2012 SUV manual cover](/images/gRPDzsKskLEfAezhFlMkQvyE/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the gas pedal slowly three times within 10 seconds. Turn the ignition off, then start the engine to verify the light is reset.
The recommended tire pressure for the 2012 Dodge Journey is typically 36 psi for both front and rear tires. Always check the sticker inside the driver's door for specific information.
To pair your phone, enable Bluetooth on your device. On the Uconnect screen, select 'Phone', then 'Add Device'. Follow the prompts on the screen and your phone to complete the pairing process.
The 2012 Dodge Journey typically requires 5W-20 synthetic oil for optimal performance. Always check the owner's manual for specific recommendations.
To replace the cabin air filter, open the glove box and remove the dampener arm. Push in the sides of the glove box to release it. Locate the filter cover, remove it, and replace the old filter with a new one.
Common causes include a loose gas cap, faulty oxygen sensor, or a malfunctioning catalytic converter. It's best to have a diagnostic test performed to pinpoint the exact issue.
To improve fuel efficiency, ensure regular maintenance like oil changes and tire pressure checks. Drive smoothly, avoid excessive idling, and remove unnecessary weight from the vehicle.
Check the battery connections and ensure they are secure and clean. If the battery is fine, inspect the starter and ignition switch. If the issue persists, consult a professional mechanic.
Spark plugs in a 2012 Dodge Journey should typically be replaced every 30,000 to 100,000 miles, depending on the type of plugs used. Refer to the owner's manual for specific intervals.
To check the transmission fluid, warm up the engine and park on a level surface. With the engine running, remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level. Ensure the fluid is at the correct level and condition.