Dodge Grand Caravan 2016 Owner's Manual
![Dodge Grand Caravan 2016 Minivan manual cover](/images/hTRqlUEhgOgJMpxFzpyDvgpf/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition switch to the "ON" position without starting the engine. Slowly press the gas pedal three times within 10 seconds, then turn the ignition to the "OFF" position.
The recommended tire pressure for the 2016 Dodge Grand Caravan is typically 36 PSI for both front and rear tires. Always check the owner's manual or the tire placard on the driver's side door for confirmation.
To pair your phone, enable Bluetooth on your device. On the Caravan's Uconnect system, select "Phone," then "Add Device." Choose your phone from the list of discovered devices and follow the prompts to complete the pairing process.
For the 2016 Dodge Grand Caravan, it is recommended to use 5W-20 synthetic blend motor oil. Always check your owner's manual for the most accurate specifications.
To replace the air filter, open the hood and locate the air filter housing. Unclip the housing cover, remove the old air filter, and replace it with a new one. Re-secure the housing cover with the clips.
Common causes include a dead battery, faulty starter, ignition switch issues, or fuel delivery problems. Start with checking the battery and terminals for corrosion or loose connections.
To change a flat tire, first ensure the vehicle is on a flat surface and the parking brake is set. Loosen the lug nuts slightly, use the jack to lift the vehicle, remove the lug nuts completely, replace the tire, and then tighten the lug nuts in a crisscross pattern after lowering the vehicle.
It is generally recommended to change the transmission fluid every 60,000 to 100,000 miles under normal driving conditions. Refer to the owner’s manual for the exact maintenance schedule.
The check engine light can illuminate due to a variety of issues, including a loose gas cap, faulty oxygen sensor, or problems with the catalytic converter. An OBD-II scanner can help diagnose the specific issue.
To replace the windshield wipers, lift the wiper arm away from the windshield. Press the release tab on the wiper blade and slide it off the arm. Attach the new wiper blade by sliding it into place until it clicks securely.