Dodge Grand Caravan 2012 Owner's Manual
![Dodge Grand Caravan 2012 Minivan manual cover](/images/gtSsPNiMZHqpkRRucoebeioM/thumbs/thumb175x175.webp)
Turn the ignition switch to the "ON" position without starting the engine. Slowly press the accelerator pedal all the way down three times within 10 seconds. Turn the ignition switch to the "OFF" position.
The 2012 Dodge Grand Caravan typically uses 5W-20 engine oil. Always check the owner's manual for confirmation.
Start by checking the fuses related to the A/C system. Ensure the refrigerant level is adequate and inspect for leaks or damage in the A/C components. If problems persist, consult a professional mechanic.
Regular maintenance includes oil and filter changes every 3,000 to 5,000 miles, tire rotations every 6,000 miles, and brake inspections every 12,000 miles. Refer to the owner's manual for a detailed schedule.
Open the glove box and remove the limiting stop arm. Squeeze the sides of the glove box to release it and access the cabin air filter cover. Remove the cover and replace the old filter with a new one.
Possible reasons include a low coolant level, a faulty thermostat, a clogged radiator, or a malfunctioning water pump. Inspect these components to diagnose the issue.
Ensure the gas cap is tight, as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to retrieve the error code or visit a mechanic for diagnosis.
Connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the good battery. Connect the negative cable to the negative terminal of the good battery and the other end to a grounded metal surface on the vehicle with the dead battery. Start the vehicle with the good battery, then start the Grand Caravan.
Transmission slipping can be caused by low transmission fluid, worn or damaged gears, or a failing transmission solenoid. Check the fluid level and condition first, and consult a mechanic if necessary.
Insert the existing key and turn it to the "ON" position. Insert the new key within 10 seconds and turn it to "ON." Wait for the security light to turn off, indicating the key has been programmed.