Dodge Durango 2012 Owner's Manual
![Dodge Durango 2012 SUV manual cover](/images/ZsMyFQgEGdyYKWOMkXoNZcCS/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds. Turn the ignition off, and then start the engine to confirm the reset.
The recommended oil for the 2012 Dodge Durango is 5W-20 synthetic blend motor oil for optimal performance and efficiency.
To pair your phone, activate Bluetooth on your device. Press the 'Phone' button on the Uconnect system, select 'Settings', then 'Add Device', and follow the prompts to complete the pairing process.
The 2012 Dodge Durango has a towing capacity of up to 7,400 pounds when properly equipped, depending on the engine and configuration.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector and the rubber cover, then twist the bulb counterclockwise to remove it. Insert the new bulb, secure it, and reattach the connector and cover.
If your Durango won't start, check the battery connections for corrosion or looseness, ensure the battery is charged, and verify that the fuel level is adequate. If the issue persists, it may require professional diagnosis.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and drive at moderate speeds. Reducing excess weight and avoiding aggressive driving can also help.
It is generally recommended to change the transmission fluid every 60,000 miles under normal driving conditions. Consult the owner's manual for specific intervals based on your driving habits.
Common causes for the check engine light include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the spark plugs. A diagnostic scan can pinpoint the exact issue.
To change the cabin air filter, open the glove compartment and release the dampener arm. Squeeze the sides of the glove box to drop it down. Remove the filter cover, replace the old filter with a new one, and reassemble the components.