Dodge Durango 2011 Owner's Manual
![Dodge Durango 2011 SUV manual cover](/images/YJadGmHdjhhCaSWRlQGDOpjh/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition switch to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within 10 seconds. Turn the ignition switch to the "LOCK" position. The indicator should be reset.
The 2011 Dodge Durango typically requires 5W-20 synthetic motor oil. Always refer to the owner's manual for the most accurate information specific to your vehicle model.
To pair your phone, enable Bluetooth on your phone and ensure it is discoverable. On the vehicle's Uconnect system, select 'Phone' > 'Settings' > 'Pair a Device'. Follow the prompts on the screen and your phone to complete the pairing process.
If your Durango won't start, check the battery connections and ensure they are clean and tight. Also, verify the battery has a sufficient charge. If the problem persists, inspect the starter and ignition system or consult a professional mechanic.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements. Keep tires properly inflated, reduce excess weight in the vehicle, and drive smoothly without rapid acceleration or braking.
The towing capacity of a 2011 Dodge Durango varies depending on the engine and configuration but generally ranges from 6,200 to 7,400 pounds. Refer to the owner’s manual for specifics related to your vehicle.
To replace the cabin air filter, open the glove box and remove the limiting arm. Press the sides of the glove box inward to release it from the dashboard. Locate and remove the cabin air filter cover, replace the filter, and reassemble.
If the check engine light comes on, first check for any obvious issues such as a loose gas cap. If the light remains on, use an OBD-II scanner to retrieve diagnostic trouble codes or consult a professional mechanic to diagnose the issue.
To change a flat tire, ensure the vehicle is on a stable surface. Use the jack to lift the vehicle, remove the lug nuts, and replace the flat tire with the spare. Tighten the lug nuts in a crisscross pattern and lower the vehicle. Ensure the lug nuts are securely tightened.
To check the transmission fluid level, warm up the engine and ensure the vehicle is on a level surface. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert the dipstick, then remove it again to check the fluid level. Add fluid if necessary.