Dexter Power MS SL 8S 3901213961 Instruction Manual

To set up the saw, ensure it is placed on a stable surface. Connect it to a power source, check all safety guards and components, and ensure the blade is correctly installed and tightened.
To change the blade, disconnect the saw from the power supply, use the wrench provided to loosen the blade bolt, remove the old blade, and carefully install the new blade, ensuring it's facing the correct direction. Tighten the bolt securely.
Check if the saw is properly plugged in and the power outlet is functional. Inspect the power cable for any damage. Ensure that the safety switch is engaged.
Regularly clean the saw to remove dust and debris. Check the blade for sharpness and replace if necessary. Inspect all moving parts and lubricate as needed. Ensure all bolts and screws are tight.
Unlock the miter lock handle, adjust the saw to the desired angle using the miter scale, and then lock the handle to secure the position.
Ensure the blade is properly tightened. Check for any damage or warping on the blade. Inspect the arbor for any issues. If the problem persists, consult a professional technician.
The saw is primarily designed for cutting wood. Using it to cut metal may require a specific blade designed for metal cutting and could pose safety risks. Consult the user manual for compatible materials and blades.
Ensure the workpiece is properly secured, the saw blade is sharp, and the saw is correctly calibrated. Use the laser guide if available and align the cut line with the blade.
Always wear safety goggles and ear protection. Keep hands away from the blade. Do not wear loose clothing or jewelry. Ensure the work area is clean and well-lit. Follow all instructions in the user manual.
Check if the laser guide is switched on. Inspect the connections and ensure there is no debris obstructing the laser path. If the issue persists, the laser may need replacement or professional servicing.