Dash DPPB120 Portable USB Instruction Manual
![Dash DPPB120 Portable USB Blender manual cover](/images/PqEIierTIFXliibcDEFHKTKS/thumbs/thumb175x175.webp)
To charge the Dash DPPB120 Portable USB Blender, connect the included USB cable to the charging port on the blender and plug the other end into a USB wall adapter or a computer USB port. The indicator light will turn red while charging and will turn off when fully charged.
If the blender does not turn on, ensure it is charged. Check the safety lock alignment; the jar should be properly aligned with the base. If the problem persists, reset the device by holding the power button for 5 seconds.
To clean the blender, fill the jar halfway with water and a drop of dish soap. Blend for a few seconds, then rinse with clean water. The jar and lid can be washed separately with mild detergent. Do not submerge the base in water.
The maximum capacity of the Dash DPPB120 Portable USB Blender is 12 ounces (approximately 350 ml). Do not exceed this limit to ensure optimal performance and avoid spillage.
No, it is not recommended to blend hot liquids in the Dash DPPB120 Portable USB Blender as this can cause pressure build-up and damage the unit. Allow liquids to cool before blending.
Charge the blender after every 8-12 uses, depending on the duration of each blend. It's advisable to charge the blender when the power indicator starts flashing. Avoid running the battery completely flat for prolonged battery life.
If the blades are not blending properly, ensure that you have not overloaded the blender. Cut ingredients into smaller pieces, add a liquid base, and avoid blending hard or frozen ingredients without adequate liquid.
The jar and lid of the Dash DPPB120 Portable USB Blender are dishwasher safe, but it is recommended to wash them on the top rack. The base should never be placed in the dishwasher.
No, it is not safe to use the Dash DPPB120 Portable USB Blender while it is charging. Always ensure the blender is fully charged and unplugged from the power source before use.
The Dash DPPB120 Portable USB Blender uses a standard micro-USB cable for charging. Ensure you use the provided cable or a similar specification to ensure optimal charging performance.