Dash DPBM002 Popcorn Ball Maker Instruction Manual
![Dash DPBM002 Popcorn Ball Maker manual cover](/images/OrUpbzQkuldXMmvwkhvpKuQc/thumbs/thumb175x175.webp)
To clean the Dash DPBM002 Popcorn Ball Maker, first unplug the device and allow it to cool completely. Wipe the interior and exterior surfaces with a damp cloth. Do not immerse the unit in water. The non-stick surfaces can be cleaned with a soft, damp sponge.
It is recommended to use standard popping corn kernels with the Dash DPBM002 Popcorn Ball Maker. Avoid using microwave popcorn or any kernels pre-coated with butter or seasoning.
Incomplete popping can be due to old or stale kernels. Ensure your kernels are fresh and stored in a cool, dry place. Also, make sure you are using the right quantity of kernels as per the user manual.
To prevent burning, avoid overfilling the machine and ensure you are using the right amount of oil or butter, as indicated in the user guide. Monitor the popping process and unplug the machine once popping slows significantly.
If the machine does not turn on, check that it is properly plugged into a functioning outlet. Inspect the power cord for damage. If the problem persists, contact customer support for further assistance.
You can add butter or oil before popping for flavor. For other seasonings, it is best to add them after the popcorn has been popped to avoid damaging the machine or affecting the popping process.
A typical batch of popcorn takes about 5-7 minutes to complete in the Dash DPBM002 Popcorn Ball Maker. This time may vary slightly depending on the quantity of kernels used.
The Dash DPBM002 Popcorn Ball Maker can accommodate approximately 1/2 cup of unpopped kernels per batch, yielding about 14-16 cups of popped popcorn.
It is not normal for the machine to emit smoke. A small amount of steam is normal, but smoke may indicate excess oil or kernels stuck in the heating element. Turn off and unplug the machine if this occurs and clean it thoroughly.
Regular maintenance includes cleaning the machine after each use, checking for any kernel debris, and ensuring the power cord is in good condition. Store the machine in a dry place to prevent moisture damage.