Dash DFM250 Deluxe Fondue Maker Instruction Manual
![Dash DFM250 Deluxe Fondue Maker manual cover](/images/EBGNBuLCmlcdeuhPPWnqfxpA/thumbs/thumb175x175.webp)
To set up the Dash DFM250, first remove all packaging materials and wash the pot and forks with warm soapy water. Dry thoroughly. Place the pot on the heating base and plug the unit into an electrical outlet. Follow the instruction manual for detailed steps.
The Dash DFM250 Deluxe Fondue Maker is suitable for preparing cheese, chocolate, broth, and oil fondues. Always follow recipes and guidelines to ensure the best results.
The Dash DFM250 features an adjustable temperature control knob. Rotate the knob to set your desired temperature. Refer to the user manual for specific temperature settings for different types of fondue.
Ensure the unit is plugged in and the temperature knob is set correctly. Check that the heating base and pot are properly aligned. If the problem persists, refer to the troubleshooting section of the manual or contact customer support.
Unplug the unit and allow it to cool completely. Remove the pot and wash it with warm, soapy water. Wipe down the heating base with a damp cloth. Do not immerse the base in water.
It is recommended to use the provided forks or wooden/plastic utensils to prevent scratching the non-stick surface of the pot.
Maintain a moderate temperature and stir the fondue regularly. Ensure that liquid-based fondues have enough liquid to prevent sticking. If using cheese, add a small amount of cornstarch to help stabilize the mixture.
Immediately turn off and unplug the unit. Allow it to cool completely before inspecting for any burnt residue or damage. Clean the pot and check the manual for further guidance. If necessary, contact customer service.
The pot and forks are dishwasher safe, but it is recommended to hand wash them to prolong their lifespan. The heating base should only be wiped with a damp cloth.
Ensure the unit is clean and completely dry before storing. Place the pot on the heating base, wrap the cord, and store in a cool, dry place. Keep all components together to avoid misplacement.