Dash DEC005 Rapid Instruction Manual
![Dash DEC005 Rapid Egg Cooker manual cover](/images/tDSQUzJFaxZJoiAtCFCmGzBd/thumbs/thumb175x175.webp)
To set up the Dash DEC005 Rapid Egg Cooker, plug it into a power outlet, add water using the measuring cup provided, place the eggs on the egg tray, cover with the lid, and turn on the power switch.
Use the measuring cup provided to add water. Fill to the "soft" line for soft-boiled eggs, "medium" for medium-boiled, and "hard" for hard-boiled eggs.
A loud noise indicates the water has completely evaporated, and the cooker is signaling that the eggs are done. Turn off the cooker promptly to prevent overheating.
Ensure the cooker is unplugged and cooled down. Remove the lid, egg tray, and measuring cup, and wash them with warm soapy water. Wipe the heating plate with a damp cloth.
The Dash DEC005 Rapid Egg Cooker is designed to cook up to six eggs at a time. Exceeding this capacity may lead to uneven cooking.
If the eggs are undercooked, add a bit more water and run another cycle. Ensure the cooker is properly plugged in and the heating element is functioning.
Yes, discoloration of the heating plate is normal due to mineral deposits from water. Regular cleaning can minimize this effect.
Use the pin on the measuring cup to pierce a small hole in the larger end of each egg before cooking. This helps release pressure and prevents cracking.
To poach eggs, fill the base with water as per the hard-boiled line, place the poaching tray on the egg rack, crack eggs into the tray, cover with the lid, and start the cooker.
Check if the cooker is properly plugged in and the switch is turned on. If the light still doesn't turn on, there might be an electrical issue, and you should contact customer support.