Danby DDW1801MW Owner's Use And Care Guide
![Danby DDW1801MW Dishwasher manual cover](/images/FbwNIdViKjabmsDvzhVDfDNf/thumbs/thumb175x175.webp)
To start a wash cycle, first load the dishwasher, add detergent, close the door securely, select the desired cycle using the control panel, and then press the Start button.
If the dishwasher is not draining, check for clogs in the drain hose, ensure the sink's garbage disposal is clear, and clean the dishwasher filter. If the problem persists, inspect the drain pump.
It's recommended to clean the dishwasher filter once a month to ensure optimal performance and to prevent clogs.
No, you should not use regular dish soap in your dishwasher as it can cause excessive suds and potentially damage the appliance. Use only dishwasher-specific detergent.
Leaks can be caused by a faulty door seal, overloading the dishwasher, or using too much detergent. Inspect the door gasket for wear and ensure the dishwasher is level.
To improve drying, use a rinse aid, ensure proper loading for better air circulation, and select the heated dry option if available.
Unusual noises can result from items touching the spray arm, loose dishwasher components, or a faulty motor. Check for obstructions and secure any loose parts.
To reset the dishwasher, disconnect it from power for a few minutes and then reconnect. This can clear minor electronic glitches.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, inspecting the door seal, and running a cleaning cycle with vinegar or a dishwasher cleaner monthly.
Ensure that the spray arms can rotate freely, the filter is clean, and the detergent is fresh. Also, make sure that the dishes are not blocking the spray arms.