Danby DCR122BLDD Owner's Use And Care Guide

To set the temperature, locate the thermostat dial inside the refrigerator compartment. Turn the dial to a higher number for colder temperatures and a lower number for warmer temperatures.
Check if the refrigerator is plugged in and the power is on. Ensure that the thermostat is set to the correct temperature. Verify that the door seals are clean and sealing properly. If the issue persists, consult the user manual for troubleshooting steps or contact customer support.
The Danby DCR122BLDD is a manual defrost refrigerator. It should be defrosted whenever the ice build-up reaches about 1/4 inch thickness. Ensure to move the contents to a cooler and unplug the unit before defrosting.
To clean the interior, first unplug the refrigerator. Use a mixture of mild soap and warm water to wipe down the surfaces. Avoid using abrasive cleaners. Dry the surfaces thoroughly before plugging the unit back in.
Keep the refrigerator clean and periodically check for expired items. Use baking soda or a commercial deodorizer inside to absorb odors. Ensure the door seals are working properly to maintain a consistent temperature.
Check if the refrigerator is level and adjust the feet if necessary. Ensure that it is not touching other objects or the wall. If the noise persists, inspect the fan and compressor for any obstructions or issues.
Unplug the refrigerator before changing the bulb. Locate the light cover inside the unit, remove it by unscrewing or unclipping it, and replace the bulb with one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
The Danby DCR122BLDD is primarily a refrigerator and may have a small freezer section suitable for short-term storage of frozen foods. For long-term storage, use a dedicated freezer.
This can be due to a blocked defrost drain. To fix it, clear any debris from the drain hole using a small brush or pipe cleaner. Ensure that the refrigerator is not overfilled, allowing air to circulate properly.
Ensure the refrigerator is placed away from direct sunlight and heat sources. Keep the door closed as much as possible and maintain a consistent temperature setting. Regularly clean the coils and ensure proper airflow around the unit.