Craftsman CMXLSBWP5 Instruction Manual
![Craftsman CMXLSBWP5 Spotlight manual cover](/images/UVDXIfYXVhHjRhxUFnPYawjk/thumbs/thumb175x175.webp)
To charge the Craftsman CMXLSBWP5 Spotlight, connect the included charger to the charging port located on the device. Plug the other end into a standard electrical outlet. The charging indicator will light up to show that the device is charging.
If the spotlight doesn't turn on, ensure that it is fully charged. Check the power button for any debris or damage. If it still doesn't work, try resetting the device by holding down the power button for 10 seconds.
To maintain the battery life, avoid leaving the spotlight in extreme temperatures. Charge the battery regularly, but do not overcharge. Use the spotlight until the battery is almost depleted before recharging.
The Craftsman CMXLSBWP5 Spotlight is water-resistant, but it is not fully waterproof. Avoid submerging it in water. It can withstand light rain and splashes.
To adjust the brightness settings, press the power button multiple times to toggle through the different brightness levels. The spotlight typically has low, medium, and high settings.
Store the spotlight in a cool, dry place. Ensure it is switched off and ideally partially charged. Avoid direct sunlight and extreme conditions that could affect the battery and casing.
The battery in the Craftsman CMXLSBWP5 Spotlight is not user-replaceable. If you experience battery issues, contact Craftsman customer support for assistance or service options.
To clean the lens, use a soft, damp cloth to gently wipe away dirt and debris. Avoid using harsh chemicals or abrasive materials that could scratch the lens.
If the spotlight is not holding a charge, try charging it fully and then using it until the battery is depleted. Repeat this cycle a few times. If the issue persists, contact customer support for further assistance.
The charging indicator light will turn from red to green when the spotlight is fully charged. This indicates that it is ready for use.