Craftsman CMXGGAS030729 Quick Setup Guide
![Craftsman CMXGGAS030729 Generator manual cover](/images/wiHddLJHdjprshQkckKdrWSE/thumbs/thumb175x175.webp)
To start the Craftsman CMXGGAS030729 generator, ensure the fuel valve is open, turn the engine switch to the 'ON' position, and pull the recoil starter gently until resistance is felt, then pull swiftly.
Use SAE 10W-30 motor oil for the Craftsman CMXGGAS030729 generator for optimal performance across a range of temperatures.
Change the oil after the first 5 hours of use, then every 50 hours or annually, whichever comes first.
If the generator won't start, check the fuel level, ensure the fuel valve is open, inspect the spark plug for fouling, and confirm that the oil level is adequate.
Inspect the air filter, check and change the oil if necessary, examine the spark plug, and ensure there are no fuel leaks. Regularly run the generator to prevent fuel line clogging.
Drain the fuel tank, run the carburetor dry, clean the generator, and store it in a dry, well-ventilated area. Cover the generator to protect it from dust.
Check the circuit breaker and reset it if necessary. Ensure all connections are secure and inspect the extension cords for damage.
Operate the generator outdoors in a well-ventilated area to prevent carbon monoxide poisoning. Use grounded extension cords and avoid overloading the generator.
Place the generator on a rubber mat to reduce vibrations, use a soundproof enclosure, or position it at a distance from living areas.
Immediately stop the generator, disconnect the spark plug, and inspect the fuel lines and tank for leaks. Replace damaged parts before resuming use.