Craftsman CMEPW1700 Instruction Manual
![Craftsman CMEPW1700 Washer manual cover](/images/xvgdBnyPsALBWPZQaEIOyjEm/thumbs/thumb175x175.webp)
To assemble the Craftsman CMEPW1700 Washer, attach the handle to the main unit, connect the high-pressure hose to the water outlet, and attach the spray wand to the hose. Ensure all connections are tight before use.
Check the power connection, ensure the power switch is turned on, and verify that the GFCI is not tripped. Additionally, inspect the power cord for any damage.
To clean the nozzle, remove it from the spray wand and use the cleaning tool provided with the washer to clear any debris. Rinse with water and reattach.
Regularly inspect hoses and connections for leaks, clean the inlet filter, and check the oil level if applicable. Also, run clean water through the system after each use to prevent buildup.
Ensure the water supply is adequate, check for clogs in the nozzle or hose, and inspect the inlet filter. Adjust the spray wand to the correct setting for the desired pressure.
After use, disconnect all hoses, drain excess water, and store the washer in a dry, frost-free location. Avoid storing in direct sunlight or damp areas.
No, the Craftsman CMEPW1700 Washer is designed for use with cold water only. Using hot water may damage the pump and other components.
Use only detergents specifically designed for pressure washers. Read the manufacturer's instructions on the detergent for proper use and dilution.
To prevent freezing, drain water from the washer and hoses, and store the unit in a heated area. You can also use a pump saver antifreeze solution.
Pulsation can occur if there is air in the machine or if the water supply is inadequate. Check for air leaks and ensure the water source provides sufficient flow.