Craftsman CMCST915B Instruction Manual
![Craftsman CMCST915B Trimmer manual cover](/images/sVNsgChcsPvJZQdBgBEyXWPk/thumbs/thumb175x175.webp)
To assemble the Craftsman CMCST915B Trimmer, attach the guard to the trimmer head using the screws provided. Then, connect the auxiliary handle to the shaft. Ensure all connections are tight and secure.
The Craftsman CMCST915B Trimmer is compatible with 0.080-inch diameter line. It is recommended to use Craftsman brand line for optimal performance.
To replace the line, remove the spool cap, pull out the empty spool, and wind new line around the spool in the direction indicated. Reinsert the spool and secure the cap.
The runtime can vary depending on usage, but the Craftsman CMCST915B typically runs for about 30 to 45 minutes on a fully charged battery.
The cutting width can be adjusted by changing the position of the trimmer line on the spool. Refer to the manual for specific instructions on adjusting the cutting width.
If the trimmer won't start, check the battery to ensure it is fully charged. Also, inspect the battery contacts for corrosion or debris. If the problem persists, consult the troubleshooting section of the manual.
After each use, clean the trimmer by wiping it down with a damp cloth. Regularly check the line spool for wear and replace if necessary. Store the trimmer in a dry place to prevent corrosion.
It is not recommended to use the Craftsman CMCST915B Trimmer in wet conditions to avoid electric shock and damage to the tool. Wait for dry conditions before using the trimmer.
Before storing, clean the trimmer thoroughly and remove the battery. Store the trimmer and battery in a cool, dry place away from direct sunlight and extreme temperatures.
Always wear eye protection and long pants. Keep bystanders at a safe distance. Avoid loose clothing and secure long hair. Follow all safety instructions in the manual.