Coleman U-Tube Fluorescent 5358H705 Instruction Manual
![Coleman U-Tube Fluorescent Lantern 5358H705 manual cover](/images/xzTCbkGvaHkxiOtxcgpHvNhU/thumbs/thumb175x175.webp)
To turn on the lantern, locate the power switch on the side of the unit. Slide the switch to the 'On' position. Ensure that the batteries are properly installed and charged.
The Coleman U-Tube Fluorescent Lantern 5358H705 requires 8 D-cell batteries. Make sure to insert them according to the polarity indicators inside the battery compartment.
First, ensure the lantern is off and remove the battery. Unscrew the protective cover and carefully remove the old fluorescent tube. Insert the new tube, reattach the cover, and reinstall the batteries.
Check if the batteries are installed correctly and are not depleted. Inspect the bulb for any visible damage or burnout. Clean the battery contacts and ensure the power switch is functional.
Regularly check and replace the fluorescent tube as needed. Clean the exterior with a damp cloth and ensure battery contacts are free of corrosion. Store in a cool, dry place when not in use.
Yes, rechargeable D-cell batteries can be used. Ensure they are fully charged and compatible with the lantern's voltage requirements.
The typical runtime is approximately 15 hours on a fresh set of 8 D-cell alkaline batteries, depending on the brand and usage conditions.
Old fluorescent tubes should be disposed of at a designated recycling center or hazardous waste facility. Avoid breaking the tube as it contains small amounts of mercury.
The Coleman U-Tube Fluorescent Lantern 5358H705 does not have a brightness adjustment feature. It operates at a fixed brightness level.
To clean the lantern, turn it off and remove the batteries. Wipe the exterior with a damp cloth and mild soap if necessary. Avoid submerging the lantern in water or using harsh chemicals.