Coleman Three Burner Camp 5B Instruction Manual
![Coleman Three Burner Camp Stove 5B manual cover](/images/hhqCHqJwnIfbOzLvbRdUzHkr/thumbs/thumb175x175.webp)
Ensure the propane tank is connected and the valve is open. Turn the burner control knob to the "High" position, then use a match or lighter to ignite the burner.
Check for blockages in the burner holes and ensure the gas flow is not obstructed. Clean the burner with a soft brush and try igniting again.
Allow the stove to cool, then wipe down with a damp cloth. For stubborn stains, use mild soap and water. Avoid abrasive cleaners that may damage the surface.
Regularly check and clean the burners and gas connections. Inspect the hose and regulator for wear and replace if necessary. Store in a dry place when not in use.
Yes, the stove is designed with wind guards to protect the burners. However, for optimal performance, try to shield the stove from strong winds when possible.
If the flame is flickering or going out, the flow may be too low. If the flame is excessively large or noisy, it may be too high. Adjust the control knobs accordingly.
No, the stove is designed for outdoor use only. Using it indoors can lead to carbon monoxide buildup, which is hazardous.
Use the control knobs located on the front of the stove to adjust each burner's flame from low to high.
The Coleman Three Burner Camp Stove 5B is compatible with standard propane cylinders.
Immediately turn off the stove and the gas supply. Check for leaks at the connections by applying soapy water and looking for bubbles. Tighten connections if needed and test again.