Coleman Spinning Towable Owner's Manual

To properly inflate the Coleman Spinning Towable Inflatable, use an electric air pump designed for inflatables. Ensure the valve is fully open, attach the pump, and inflate until the tubing is firm but not overinflated. Check the manufacturer's guidelines for the recommended air pressure.
To deflate the spinning towable, open the valve completely to allow air to escape. Gently press down on the inflatable to speed up the process. Once deflated, fold the towable neatly, avoiding any sharp creases that could damage the material.
Ensure the tow rope is securely attached to both the towable and the boat. Use a heavy-duty rope and check that the connection points on both the boat and towable are in good condition. It's crucial to follow the manufacturer's instructions for attaching the towable to prevent accidents.
If the towable begins to lose air while in use, stop using it immediately. Bring it to shore, check for leaks or holes, and repair them using a patch kit designed for inflatables. Do not continue to use the towable until it is fully repaired and safe.
Rinse the towable with fresh water after use to remove salt, sand, and debris. Use a mild soap if necessary, but avoid harsh chemicals. Dry the towable completely before storing it to prevent mold and mildew.
Regularly inspect your towable for any signs of wear or damage. Repair any small tears or punctures immediately using a patch kit. Store the towable in a cool, dry place away from direct sunlight when not in use.
The Coleman Spinning Towable Inflatable is designed for a specific number of riders, typically one or two. Always refer to the manufacturer's specifications to ensure you do not exceed the maximum capacity, as this could compromise safety.
Inspect the towable for any obstructions or damage that could impede its spinning ability. Check the tow rope and attachment points for proper alignment. If the issue persists, consult the manufacturer's troubleshooting guide or contact their customer service for assistance.
It is not recommended to use the towable in rough water conditions. For safety, always use in calm waters, and ensure all riders are wearing life vests. Adverse weather can increase the risk of accidents and should be avoided.
To repair a puncture, locate the hole and clean the area around it. Use a patch kit specifically designed for inflatables, following the included instructions. Allow the adhesive to cure fully before re-inflating and using the towable.