Coleman Side Solution LP Gas Barbecue 9993 Series Instruction Manual
![Coleman Side Solution LP Gas Barbecue 9993 Series manual cover](/images/brzlwBrASaVUMnReVkpszRsA/thumbs/thumb175x175.webp)
To ignite the grill, first ensure the LP gas tank is properly connected and turned on. Open the grill lid, turn the burner control knob to the "Start/High" position, and press the ignition button. If the burner does not light, wait 5 minutes before trying again to allow gas to dissipate.
Check the LP gas level in the tank to ensure it is not empty. If the gas level is adequate, clean the burner tubes and ports to remove any obstructions. Also, make sure the regulator is functioning correctly and not clogged.
It is recommended to clean the grill grates after each use to prevent food buildup and rust. For the interior parts, perform a thorough cleaning every 5-10 uses. Remove the grates and clean the heat deflectors and burner tubes using a grill brush and soapy water.
Clean the grill thoroughly and disconnect the LP gas tank. Store the tank in a cool, dry place. Cover the grill with a weather-resistant cover and store it in a sheltered area to protect it from harsh weather conditions.
To prevent flare-ups, trim excess fat from meats before grilling and keep the lid open while cooking fatty foods. Additionally, use a drip pan to catch grease and avoid cooking at excessively high temperatures.
Ensure that the LP gas tank is full and the valve is open. Check for any blockages in the burner tubes and clean them if necessary. Verify that the regulator is connected securely and functioning correctly.
Mix a solution of water and dish soap, then apply it to the gas connections and hoses. Turn on the gas and look for bubbles forming, which indicate a leak. If a leak is detected, turn off the gas and tighten the connections or replace faulty parts.
Regular maintenance includes cleaning the grill grates, checking and cleaning the burners and heat deflectors, inspecting the gas hose for cracks or damage, and checking for any signs of rust or corrosion on the grill body.
To replace the igniter, first disconnect the gas supply. Remove the control panel to access the igniter. Disconnect the wires attached to the igniter and remove it from the mounting bracket. Install the new igniter, reattach the wires, and secure the control panel.
The Coleman 9993 Series Grill is designed for LP gas use only and should not be converted to natural gas. Converting the grill may compromise safety and void any warranty. Refer to the manufacturer's guidelines for more information.