Coleman Propane 5445K901 Owner's Manual

To ignite the Coleman Propane Heater 5445K901, ensure the propane cylinder is properly connected, turn the knob to the "Ignite" position, and press the ignition button until the heater lights.
If the heater does not ignite, check that the propane cylinder is full and correctly attached. Ensure the ignition button is functioning and clear any debris from the burner area.
To maintain steady heat output, keep the heater clean, ensure the propane cylinder is not near empty, and position the heater away from drafts and wind.
Regularly inspect and clean the burner and ignition area, check for gas leaks, and store the heater in a dry place when not in use.
A low flame might occur if the propane cylinder is low or the burner is clogged. Check and replace the cylinder if necessary and clean the burner.
Disconnect the propane cylinder, clean the heater, and store it in a cool, dry place away from direct sunlight and flammable materials.
Immediately turn off the heater, disconnect the propane cylinder, and move to a well-ventilated area. Check for leaks and consult the manual for further instructions.
The Coleman Propane Heater 5445K901 is designed for outdoor use only. Using it indoors can lead to carbon monoxide buildup and is dangerous.
To clean the burner, ensure the heater is cool and the propane cylinder is disconnected. Use a soft brush to remove debris and wipe with a damp cloth if necessary.
Apply a soapy water solution to the connection points and look for bubbles, which indicate a leak. Tighten connections or replace parts as needed.