Coleman Peak-1 Apex 450-700C Instruction Manual

To ignite the stove, first make sure the fuel valve is closed. Attach the fuel bottle, pump it a few times to pressurize, and then open the valve slightly to release a small amount of fuel. Light the fuel with a match or lighter, then adjust the valve to increase the flame to the desired level.
If the flame is flickering or uneven, check the fuel level and pressure in the fuel bottle. Ensure the fuel jet is clean and that there are no obstructions in the fuel line. Regular maintenance and cleaning of the stove components can prevent this issue.
It is recommended to clean your stove after every trip. Regular maintenance includes checking the fuel line for blockages, cleaning the fuel jet, and wiping down the exterior to prevent buildup of dirt and grime.
The stove is designed to use white gas. Ensure you are using clean, fresh fuel for optimal performance. Using other types of fuel may damage the stove or reduce efficiency.
Low heat output can often be resolved by checking and cleaning the fuel jet and ensuring the fuel bottle is adequately pressurized. Also, verify that the fuel valve is fully open.
Store the stove in a cool, dry place away from moisture. Detach the fuel bottle and ensure all components are clean and dry to prevent corrosion or damage.
To replace the pump cup, remove the pump from the fuel bottle. Slide off the old pump cup and replace it with a new one, ensuring it is properly lubricated. Reassemble the pump and test for proper pressurization.
A hissing sound may indicate a leak in the fuel line or valve. Check all connections and seals for tightness and integrity. If the issue persists, consider replacing worn parts.
Yes, the Coleman Peak-1 Apex 450-700C Stove is designed for use at various altitudes. However, you may need to adjust fuel pressure and flame settings to compensate for lower oxygen levels at higher elevations.
Inspect the fuel line regularly for signs of wear, cracks, or stiffness. If you notice any damage or if the line becomes difficult to attach or detach, it is time to replace it to ensure safety and performance.