Coleman Instastart Propane 5444 Series Instruction Manual
![Coleman Instastart Propane 5444 Series manual cover](/images/KaUHhPxDgdgdRxaQbrquBJjK/thumbs/thumb175x175.webp)
To ignite the stove, first ensure the propane tank is securely attached. Turn the gas control knob to the "Ignite" position and press the Instastart ignition button until the burner lights.
Check to ensure the propane tank is full and properly connected. Inspect the igniter for debris or damage. If the igniter is still not working, try lighting the stove manually with a match or lighter.
Remove the grates and wash them with warm, soapy water. Use a soft brush to clean the burners, ensuring the ports are free of debris. Reassemble once dry.
Regularly check connections for leaks using soapy water. Clean the burners and grates after each use and store the stove in a cool, dry place.
Detach the propane tank and clean the stove thoroughly. Store it in a protective case or cover in a dry, cool location away from direct sunlight.
Ensure the propane tank is adequately filled. Check for any blockages in the burner or regulator. If these steps do not resolve the issue, inspect the regulator for damage.
Yes, but it is advisable to use a windscreen to protect the flame. Position the stove with its back to the wind to minimize flame disturbance.
Mix a solution of water and dish soap, apply it to the gas connections, and look for bubbles forming, which indicate a leak. Tighten connections if necessary.
Turn off the gas control knob, wait for a few minutes to allow gas dispersion, and then relight the stove. Check for any drafts or wind that might have extinguished the flame.
Regularly clean the stove and ensure all components are in good condition. Use high-quality propane and check for leaks or blockages in the burner.