Coleman Focus 12 Radiant 5011A701C Owner's Manual
![Coleman Focus 12 Radiant Heater 5011A701C manual cover](/images/mZkQWJKgHnJIMhuuwBaFLSNb/thumbs/thumb175x175.webp)
To ignite the heater, first ensure that it is placed on a stable surface away from flammable materials. Turn the gas control knob to the 'Pilot' position and press it down. While holding the knob down, repeatedly press the ignition button until the pilot light ignites. After the pilot is lit, continue to hold the knob down for about 30 seconds before releasing it and turning the knob to the desired heat setting.
If the pilot light won't stay lit, check to ensure that the gas supply is turned on and that there is no obstruction in the gas line. Also, confirm that the thermocouple is positioned correctly near the pilot flame. If these steps do not resolve the issue, the thermocouple may need to be cleaned or replaced.
Ensure the heater is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior surfaces. For the reflector, gently remove any dust or debris with a soft brush. Avoid using water or any cleaning agents on the heater.
Regularly inspect the heater for any signs of wear or damage. Clean the burner and reflector surfaces to ensure efficient operation. Check the gas lines and connections for leaks. It is also advisable to have the heater professionally serviced at least once a year.
The Coleman Focus 12 Radiant Heater is designed for outdoor use. Using it indoors is not recommended as it requires proper ventilation to prevent the buildup of carbon monoxide. Always follow the manufacturer's safety guidelines.
Immediately turn off the heater and extinguish any open flames. Ventilate the area by opening windows and doors. Do not operate any electrical switches. Check the gas connections for leaks using a soap and water solution. If the smell persists, contact a professional technician.
Before storing, ensure the heater is cool and clean. Disconnect the gas supply and store the heater in a dry, well-ventilated area away from direct sunlight and moisture. Cover it with a protective tarp to prevent dust accumulation.
The Coleman Focus 12 Radiant Heater is designed to be used with propane gas. Using a different type of gas can be hazardous and is not recommended. Always adhere to the manufacturer's specifications for fuel type.
To check for gas leaks, mix a solution of soap and water and apply it to the gas connections and lines. Turn on the gas supply without lighting the heater. If you see bubbles forming, it indicates a leak. Tighten the connections and test again.
Ensure that the propane tank is not empty and that the gas valve is open. Check the ignition system for any visible damage or debris. Verify that the thermocouple is clean and properly aligned. If the heater still does not start, consult the user manual or contact customer support.