Coleman Electronic Ignition Radiant 5443-751 Owner's Manual

To ignite the heater, ensure it is placed on a stable surface. Turn the control knob to the 'Ignite' position while pressing the ignition button. Hold it for a few seconds until the heater lights up, then release.
Check if the gas supply is connected and turned on. Ensure the ignition button is being pressed fully. If it still does not ignite, inspect the spark electrode for damage or wear and clean any debris.
Regularly clean the exterior with a damp cloth. Inspect the burner and ignition system for debris or corrosion. Store the heater in a dry place when not in use to prevent rust.
Ensure proper ventilation in the area where the heater is used. Do not place it near flammable objects, and never leave it unattended while operating. Keep children and pets away from the heater.
Check the gas pressure and make sure the tank is not empty. Inspect the burner for any blockages or dirt. Clean or replace components as necessary to ensure a strong flame.
The Coleman Electronic Ignition Radiant Heater is designed for outdoor use only. Using it indoors without proper ventilation can lead to carbon monoxide buildup, which is hazardous.
Immediately turn off the heater and the gas supply. Do not use open flames or electrical appliances. Ventilate the area and inspect the connections for leaks. Seek professional assistance if necessary.
Replace the gas cylinder when it is empty. Monitor the burn time and gas level to ensure you have a backup cylinder ready to avoid interruptions.
The Coleman Electronic Ignition Radiant Heater 5443-751 is compatible with standard propane cylinders. Ensure the cylinder is properly connected and the seal is intact.
Clean the heater and remove any debris. Disconnect the gas cylinder and store it separately in a well-ventilated area. Cover the heater with a protective cover and store it in a dry place.