Clarke 8877115 IG2000C 1800W Inverter Instructions
![Clarke 8877115 IG2000C 1800W Inverter Generator manual cover](/images/mSeRAsBGfEGhOBqMlSaXANeB/thumbs/thumb175x175.webp)
To start the Clarke 8877115 IG2000C Inverter Generator, ensure it is on a flat surface. Check fuel and oil levels, turn the fuel valve to 'On', set the choke lever to 'Choke', and pull the starter cord briskly. Once started, set the choke lever to 'Run'.
If the generator does not start, check the fuel level and ensure the fuel valve is open. Verify the oil level and inspect the spark plug for any damage or fouling. Additionally, ensure the battery is charged if using electric start, and double-check the choke position.
Change the oil after the first 20 hours of operation, then every 50 hours or annually, whichever comes first. Use SAE 10W-30 oil for optimal performance.
Perform regular maintenance by changing the oil every 50 hours, cleaning the air filter every 100 hours, and inspecting the spark plug every 100 hours. Additionally, check and clean the fuel system annually.
To change the oil, run the generator for a few minutes to warm the oil. Turn off the engine and remove the oil filler cap. Tilt the generator to drain the oil into a suitable container. Refill with new oil and replace the filler cap.
If the generator runs rough, check the air filter for cleanliness, inspect the spark plug for wear or fouling, and ensure the fuel is fresh. Additionally, check for any fuel line blockages or carburetor issues.
Yes, the Clarke 8877115 IG2000C features inverter technology, providing clean and stable power suitable for sensitive electronics such as computers and smartphones.
For long-term storage, drain the fuel tank and carburetor to prevent gumming. Change the oil, remove the spark plug, and add a few drops of oil to the cylinder. Store in a dry, well-ventilated area.
The Clarke 8877115 IG2000C generator provides a maximum continuous power output of 1800 watts, suitable for powering small appliances and tools.
To reduce noise, ensure the generator is placed on a stable, flat surface. Use the eco-throttle mode for reduced engine speed and noise. Additionally, positioning the generator further away or using sound barriers can help.