Clarke 8877112 IG1200D 1100W Inverter Instructions
![Clarke 8877112 IG1200D 1100W Inverter Generator manual cover](/images/cIqqCHJphVnJKveWBWoBoRbC/thumbs/thumb175x175.webp)
To start the Clarke 8877112 IG1200D, ensure the generator is on a flat surface, check fuel and oil levels, turn the fuel valve to "ON," set the choke to "CLOSED," and pull the recoil starter gently until resistance is felt, then pull quickly. Once started, move the choke to "OPEN."
It's recommended to perform maintenance every 50 hours or at least once a year. This includes changing the oil, cleaning the air filter, checking and cleaning the spark plug, and inspecting the fuel system for leaks or damage.
If the generator won't start, check the fuel level, ensure the fuel valve is "ON," verify the spark plug is clean and properly connected, and check that the oil level is sufficient. Also, ensure the choke is set correctly for starting.
Use SAE 10W-30 oil for the Clarke IG1200D Inverter Generator. Ensure the oil is suitable for the ambient temperature in your operating environment.
Yes, the Clarke 8877112 IG1200D is an inverter generator, which provides a stable power output suitable for sensitive electronics such as computers and televisions.
To change the oil, ensure the generator is off and cool. Remove the oil filler cap, tilt the generator to drain the old oil into a suitable container, then refill with fresh SAE 10W-30 oil to the recommended level and replace the cap.
The Clarke 8877112 IG1200D Inverter Generator has a maximum output capacity of 1100 watts, making it suitable for small appliances and devices.
To clean or replace the air filter, remove the air filter cover, take out the filter, and clean it with soapy water if reusable, or replace it if damaged. Ensure it is dry before reinstalling and securing the cover.
For long-term storage, drain the fuel system by running the generator until it stops, change the oil, remove the spark plug and add a few drops of oil into the cylinder, and store the unit in a cool, dry place.
If the circuit breaker trips, turn off the generator, unplug all appliances, reset the breaker by pressing it, and then restart the generator. Reconnect appliances one at a time to avoid overloading.