Clarke 8877080 IG2000 2000W Inverter Instructions
![Clarke 8877080 IG2000 2000W Inverter Generator manual cover](/images/PmpIxjsWvsTiAKWwkbnMZqZB/thumbs/thumb175x175.webp)
To start the Clarke 8877080 IG2000 Inverter Generator, first ensure that it is on a flat surface. Turn the fuel valve to the 'ON' position, set the choke lever to 'CLOSE', and then pull the recoil starter handle gently until resistance is felt before pulling quickly to start the engine. Once started, gradually move the choke lever to the 'OPEN' position.
The Clarke IG2000 Generator should be operated using unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol. Always ensure fuel is fresh and clean to prevent starting issues.
The oil in the Clarke IG2000 Generator should be changed after the first 20 hours of use, and then every 50 hours or annually, whichever comes first. Regular oil changes ensure optimal performance and longevity of the engine.
To clean the air filter, first remove the cover by releasing the clips. Take out the foam filter element and wash it with warm soapy water. Rinse thoroughly and allow it to dry completely. Lightly oil the filter before reinserting it. Ensure the air filter is properly secured before replacing the cover.
If the generator won't start, check the fuel level and ensure the fuel valve is open. Verify the spark plug is clean and properly gapped. Make sure the air filter is clean and the choke is set correctly. If issues persist, consider consulting a professional technician or the user manual for further troubleshooting steps.
To store the generator safely, run the engine with the fuel valve closed until it stops to empty the carburetor. Drain any remaining fuel from the tank. Clean the exterior and store the generator in a dry, cool place away from direct sunlight. Consider using a cover to protect it from dust.
Routine maintenance includes checking and changing the oil, cleaning the air filter, inspecting the spark plug, and checking for fuel leaks. Additionally, inspect the recoil starter and ensure the muffler is not obstructed. Refer to the user manual for a detailed maintenance schedule.
The Clarke 8877080 IG2000 Generator has a maximum power output of 2000 watts, making it suitable for powering small appliances, tools, and electronics during outages or in remote locations.
Yes, the Clarke IG2000 Generator is capable of parallel connection with another compatible unit to increase power output. Ensure both units are properly connected using the manufacturer's parallel kit and follow safety instructions.
If the generator is running rough or misfiring, check the spark plug for wear or carbon build-up and clean or replace it if necessary. Ensure the air filter is clean and verify that the fuel is fresh and uncontaminated. If the problem persists, consult a professional technician.