Clarke 8857854 PG3800ADV 3KVA Dual Voltage Instructions
![Clarke 8857854 PG3800ADV 3KVA Dual Voltage Generator manual cover](/images/cEFcfGARVUUIshozDoBFEymZ/thumbs/thumb175x175.webp)
To start the generator, first ensure it is on a flat surface. Turn the fuel valve to the 'ON' position, switch the engine control to 'ON', and then pull the recoil starter firmly.
Use SAE 10W-30 oil for optimal performance and protection in both warm and cold climates.
Change the oil after the first 20 hours of operation, then every 50 hours or annually, whichever comes first.
Check the fuel level, ensure the fuel valve is open, verify the choke position, and inspect the spark plug for any fouling.
No, the generator should not be used indoors due to the risk of carbon monoxide poisoning. Always operate it in a well-ventilated area.
To switch between voltage settings, turn off the generator, select the desired voltage using the voltage selector switch, and then restart the generator.
Inspect the air filter for dirt and debris every 25 hours of operation and clean or replace it as necessary.
Do not exceed the rated power output, and connect only necessary devices. Use a power management plan to stagger device startup if needed.
Check for fuel supply issues, inspect the air filter, and verify there are no electrical overloads. Restart the generator after addressing the issue.
Drain the fuel tank and carburetor, clean the generator, and store it in a dry, cool place. Disconnect the battery if applicable.