Clarke 8857820 PG6500DVES 5.5KVA Instructions

To start the Clarke 8857820 PG6500DVES generator, ensure the fuel valve is open, set the choke to the 'start' position, turn the ignition switch to 'on', and either pull the recoil starter or use the electric start button.
The Clarke 8857820 PG6500DVES generator is dual-fuel, meaning it can run on both unleaded gasoline and propane. Ensure you use fresh, clean fuel to maintain optimal performance.
It is recommended to change the oil every 25 hours of operation or at least once per season. Use SAE 10W-30 oil for the best results.
Check the fuel level, battery charge, and ensure the spark plug is clean and connected. Make sure the choke is set correctly and the fuel valve is open.
To switch from gasoline to propane, turn off the generator, close the gasoline valve, connect the propane hose, and open the propane valve. Restart the generator using the propane setting.
Regular maintenance includes checking and changing the oil, inspecting the air filter, checking the spark plug, and ensuring all connections are secure.
To clean the air filter, remove the filter cover, take out the filter, wash it with warm soapy water, rinse thoroughly, and let it dry completely before reinstalling.
While the generator can run for extended periods, it should not be operated continuously without breaks to prevent overheating. Follow the manufacturer's guidelines for run times and rest periods.
The Clarke PG6500DVES generator can handle a continuous load of up to 5.5KVA. Avoid overloading to prevent damage to the generator.
For storage, ensure the generator is clean, drained of fuel, and stored in a dry location. Disconnect the battery and cover the generator to protect it from dust and moisture.