Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Instructions

Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Press manual cover
Pages 20
Year 2020
Language(s)
English en

Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Press Specification

The Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Press is a robust and versatile machine designed for a variety of pressing operations in workshops and industrial settings. This hydraulic press has a maximum pressing force of 20 tonnes, making it suitable for tasks such as bending, straightening, and pressing out bearings and bushings. The press is constructed with a solid steel frame, ensuring durability and stability during operation.

Equipped with a manually operated hydraulic pump, the CSA20FBT allows for precise control over the pressing process. The pump is capable of generating substantial pressure with minimal effort, thanks to its efficient hydraulic system. The press features an adjustable working table, enabling the accommodation of different workpiece sizes and providing flexibility for various applications. This table can be easily raised or lowered to achieve the optimal working height required for each task.

Safety is a key consideration in the design of the Clarke CSA20FBT. The press includes a pressure gauge for monitoring the applied force, ensuring that operations are conducted within safe limits. Additionally, the hydraulic press is designed with overload protection to prevent damage to the machine and ensure operator safety.

The Clarke 7614058 CSA20FBT hydraulic press is intended for use in professional environments where reliability and performance are critical. Its compact design allows for efficient use of space, making it suitable for smaller workshops while still delivering the power needed for demanding tasks. Overall, the CSA20FBT offers a combination of strength, precision, and safety, making it a valuable addition to any professional workshop.

Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Press F.A.Q.

What are the initial setup steps for the Clarke 7614058 CSA20FBT 20 Tonne Hydraulic Press?

To set up the Clarke 7614058 CSA20FBT hydraulic press, ensure it is placed on a stable, level surface. Check all components are securely fitted and the hydraulic fluid is at the recommended level.

How do I properly bleed the hydraulic system of this press?

To bleed the hydraulic system, slowly open the release valve and pump the handle several times to remove any trapped air. Close the valve and test the press for smooth operation.

What are common troubleshooting steps if the press is not reaching its full capacity?

Check for air in the hydraulic system, ensure there are no leaks, and verify that the hydraulic fluid is at the correct level. Inspect the seals and hoses for any signs of wear or damage.

How often should I change the hydraulic fluid in the Clarke hydraulic press?

It is recommended to change the hydraulic fluid every 12 months or after approximately 500 hours of operation to maintain optimal performance.

What maintenance is required for the Clarke 7614058 CSA20FBT to ensure long-term reliability?

Regularly inspect and clean the press, check and tighten bolts and connections, and ensure the hydraulic fluid is at the correct level. Replace any worn or damaged components promptly.

How can I test the pressure gauge for accuracy on this hydraulic press?

To test the pressure gauge, use a calibrated gauge to compare readings while applying a load. If discrepancies are found, the gauge may need calibration or replacement.

What should I do if the press handle becomes difficult to pump?

Check for any obstructions in the hydraulic system and ensure the oil level is adequate. Lubricate the pivot points and check for any signs of wear or damage in the pump mechanism.

Can the Clarke hydraulic press be used for bending operations?

Yes, the Clarke 7614058 CSA20FBT can be used for bending operations. Ensure to use appropriate bending attachments and never exceed the press's capacity.

What safety precautions should be followed when operating the Clarke hydraulic press?

Always wear safety goggles and gloves, ensure the workpiece is securely positioned, and never stand directly in front of the press during operation. Regularly inspect the press for any signs of wear or damage.

How can I improve the lifespan of the hydraulic seals on this press?

Maintain clean hydraulic fluid, avoid overloading the press, and regularly inspect and replace seals as needed. Store the press in a clean, dry environment to prevent contamination.