Clarke 7320205 Tiger 2600 Petrol Driven Power Instructions

Clarke 7320205 Tiger 2600 Petrol Driven Power Washer manual cover
Pages 32
Year 2015
Language(s)
English en

Clarke 7320205 Tiger 2600 Petrol Driven Power Washer Specification

The Clarke 7320205 Tiger 2600 is a robust petrol-driven power washer designed for efficient and high-performance cleaning tasks. At its core, this power washer is equipped with a powerful 196cc 4-stroke engine, enabling it to deliver a maximum pressure of 2600 PSI. This high-pressure output ensures that even the most stubborn dirt and grime can be effectively removed from various surfaces, making it ideal for both domestic and light commercial use. The unit's flow rate is approximately 7.9 liters per minute, striking a balance between power and water consumption.

The Tiger 2600 features a durable and compact design, which is essential for ease of mobility and storage. Its robust frame supports the engine and pump assembly, ensuring stability during operation. The washer comes with a high-pressure hose and spray gun, which are designed to withstand the unit's maximum pressure output, ensuring durability and reliability in performance. The inclusion of interchangeable nozzles allows for versatility in cleaning applications, enabling users to switch between different spray patterns and pressures depending on the task at hand.

For ease of use, the Clarke Tiger 2600 is equipped with an ergonomic handle and sturdy wheels, allowing for easy transportation across different terrains. Its petrol-driven nature eliminates the need for an electrical power source, providing greater flexibility in terms of where it can be used. This makes it particularly useful in locations where electricity may not be readily available. Overall, the Clarke 7320205 Tiger 2600 is designed to offer powerful, efficient, and versatile cleaning capabilities for a wide range of outdoor cleaning requirements.

Clarke 7320205 Tiger 2600 Petrol Driven Power Washer F.A.Q.

How do I start the Clarke 7320205 Tiger 2600 Power Washer?

Ensure the water supply is connected and turned on. Set the choke to the start position, switch the engine to "On", and pull the starter cord briskly. Once started, move the choke to the run position.

What should I do if the engine of the power washer does not start?

Check the fuel level and ensure fresh petrol is used. Verify that the spark plug is connected and clean. Ensure the choke is in the correct position and that the water supply is adequate.

How can I maintain the pump of the power washer?

Regularly check and replace the pump oil as per the user manual. Use a pump protector or antifreeze during storage to prevent damage.

What type of oil should be used for the engine?

Use SAE 10W-30 oil for the engine. Refer to the user manual for specific oil capacity and change intervals.

How do I clean the nozzles of the power washer?

Detach the nozzle and use a needle or nozzle cleaning tool to remove any debris. Rinse with water and reattach.

What is the recommended procedure for winterizing the power washer?

Drain all water from the pump and hoses. Add a pump antifreeze solution and run the machine briefly to distribute it. Store the washer in a dry place.

How do I troubleshoot low pressure from the power washer?

Check for any kinks in the hose, clean the nozzle, and ensure the water supply is adequate. Inspect the pump for any leaks or damage.

What safety precautions should be taken while using the power washer?

Wear protective eyewear and gloves. Avoid pointing the nozzle at people or pets. Ensure stable footing and avoid wet surfaces to prevent slips.

How often should the air filter be cleaned or replaced?

Check the air filter every 25 hours of use or monthly. Clean with soap and water if reusable, or replace if it is not in good condition.

What should I do if there is water leakage from the power washer?

Inspect all hose connections for tightness. Check seals and gaskets for wear and replace if necessary. Ensure the pump is not cracked or damaged.