Clarke 7230698 EPC800 Electronic Controller Instructions

Clarke 7230698 EPC800 Electronic Pump Controller manual cover

Pages 12

Year 2022

Language(s)

of 12

Clarke 7230698 EPC800 Electronic Pump Controller Specification

The Clarke 7230698 EPC800 Electronic Pump Controller is an advanced device designed to regulate water pump operations efficiently and reliably. It is engineered to automatically control the starting and stopping of electric water pumps, safeguarding against dry running and optimizing performance. The EPC800 features a robust design suitable for both residential and commercial applications, with a focus on enhancing energy efficiency and longevity of pump systems.

This electronic pump controller is equipped with a pressure sensor and a flow sensor, which work in tandem to ensure precise control over the pump's operational parameters. It activates the pump when the pressure drops below a set threshold and stops it when the desired pressure is restored or when there is no flow detected, thus preventing damage from dry running. The device supports a maximum current of 10A and can handle pumps with a power rating of up to 1.1 kW, making it versatile for various pump models.

The EPC800 is housed in a durable, weather-resistant casing, ensuring reliable operation in diverse environmental conditions. It is designed for easy installation and integration into existing pump systems, with clear indicators and controls that simplify monitoring and adjustments. The controller operates on a standard 230V power supply and offers a compact form factor, facilitating seamless incorporation into limited spaces.

Safety features include automatic reset and manual override options, providing flexibility and control to the user. The Clarke 7230698 EPC800 represents a sophisticated solution for maintaining consistent water pressure and protecting pump infrastructure, aligning with modern demands for efficiency and reliability in fluid management systems.

Clarke 7230698 EPC800 Electronic Pump Controller F.A.Q.

How do I install the Clarke 7230698 EPC800 Electronic Pump Controller?

To install the Clarke 7230698 EPC800, first ensure the power supply is turned off. Connect the input hoses to the water source and the output hoses to the pump. Secure the controller using the provided mounting brackets and connect the electrical wires according to the manual's wiring diagram. Finally, turn the power back on and test the system for leaks or issues.

What should I do if the pump does not start when using the EPC800 controller?

If the pump does not start, check that the controller is receiving power. Ensure all wiring connections are secure and correct. Verify that the pump's motor is not overloaded or jammed. Also, inspect the pressure settings on the controller to ensure they are configured properly.

How can I adjust the pressure settings on the Clarke EPC800?

To adjust the pressure settings, open the control panel on the EPC800 and locate the pressure adjustment knobs. Refer to the user manual for the recommended settings and turn the knobs to increase or decrease the pressure as needed. Ensure the system is off when making adjustments.

What maintenance is required for the Clarke 7230698 EPC800 Electronic Pump Controller?

Regular maintenance includes inspecting all connections and hoses for leaks or wear, cleaning any debris from the filter, and checking the electrical connections for corrosion. It's also important to periodically test the pressure settings and recalibrate them if necessary.

Why does the EPC800 display a low-pressure warning?

A low-pressure warning could indicate a leak in the system, a blocked filter, or an improperly set pressure threshold. Check for leaks, clean the filter, and verify the pressure settings to ensure they align with the system's requirements.

How can I reset the Clarke EPC800 controller?

To reset the EPC800 controller, turn off the power supply and wait for a few seconds. Turn the power back on and press the reset button located on the control panel. This should clear any error codes and reset the system.

What should I do if the EPC800 controller is frequently cycling on and off?

Frequent cycling can be caused by a pressure tank that is too small, a leak in the system, or incorrect pressure settings. Check the pressure tank size, inspect the system for leaks, and ensure the pressure settings are correctly configured.

Can the Clarke EPC800 be used with any type of pump?

The Clarke EPC800 is compatible with most standard pumps. However, it is essential to ensure that the pump's specifications meet the controller's requirements and that the electrical connections are compatible. Refer to the user manual for compatibility guidance.

Is it normal for the Clarke EPC800 to make noise during operation?

Some noise is normal as the EPC800 operates, particularly when the pump starts or stops. However, excessive noise may indicate an issue with the mounting or a problem within the system. Inspect the installation for loose components and ensure everything is securely fastened.

How do I troubleshoot error codes on the Clarke EPC800?

Refer to the user manual for a list of error codes and their meanings. Common steps include resetting the system, checking for blockages or leaks, verifying electrical connections, and reviewing pressure settings. If issues persist, contact customer support for further assistance.