Clarke 7230582 CSV1A Submersible Water Instructions

Clarke 7230582 CSV1A Submersible Water Pump manual cover

Pages 12

Year 2018

Language(s)

of 12

Clarke 7230582 CSV1A Submersible Water Pump Specification

The Clarke 7230582 CSV1A Submersible Water Pump is designed for efficient water removal in a variety of residential and light commercial applications. Featuring a robust construction, the pump is engineered with a durable thermoplastic body that ensures resistance to corrosion and wear, making it ideal for prolonged use in both fresh and saltwater environments. The pump is powered by a reliable 230V electric motor, delivering a maximum flow rate of 140 liters per minute, which provides rapid water removal from flooded basements, wells, and cisterns.

The pump can operate at depths of up to 7 meters, making it versatile for diverse applications. It includes an automatic float switch that enables the pump to switch on and off automatically, preventing dry running and ensuring energy efficiency. The pump's design incorporates an integrated handle for easy transportation and installation, while the compact dimensions allow it to fit in tight spaces. It includes a 10-meter power cable, offering flexibility and convenience in placement.

The Clarke CSV1A is equipped with a 1¼ inch BSP outlet, compatible with a range of standard hose fittings, enhancing its adaptability for various setups. Its motor is thermally protected to prevent overheating, contributing to the longevity of the unit. This submersible pump is engineered for low maintenance, with a straightforward design that simplifies cleaning and service. Suitable for a range of drainage tasks, the Clarke 7230582 CSV1A provides a reliable, efficient solution for managing unwanted water accumulation with minimal oversight.

Clarke 7230582 CSV1A Submersible Water Pump F.A.Q.

How do I install the Clarke 7230582 CSV1A Submersible Water Pump?

To install the Clarke 7230582 CSV1A Submersible Water Pump, place the pump in the desired location submerged in water. Ensure the power supply is off, connect the discharge pipe, and then connect to the power source. Follow all safety guidelines provided in the manual.

What should I do if the pump is not starting?

If the pump is not starting, check the power supply and ensure the pump is plugged in correctly. Inspect the fuse and replace if necessary. Make sure the float switch is not stuck and that the thermal overload protection has not triggered.

How often should I perform maintenance on this pump?

Perform maintenance on the Clarke 7230582 CSV1A Submersible Water Pump every 6 months. This includes checking the impeller for blockages, inspecting seals for wear, and cleaning the pump exterior.

What is the maximum depth the pump can be submerged?

The maximum depth the Clarke 7230582 CSV1A Submersible Water Pump can be submerged is 7 meters. Ensure the pump is not submerged deeper to avoid damage.

Can this pump handle dirty water with solids?

Yes, the Clarke 7230582 CSV1A Submersible Water Pump is designed to handle dirty water with solids up to 5mm in diameter. Ensure larger debris is filtered out to prevent clogs.

How do I clean the pump if it gets clogged?

To clean the pump, disconnect it from the power source, remove it from the water, and disassemble the casing. Remove any debris from the impeller and inlet areas, then reassemble and test the pump.

What precautions should I take during winter with the pump?

During winter, remove the pump from the water if freezing temperatures are expected. Clean and dry the pump, then store it in a dry location to prevent ice damage.

How can I increase the lifespan of the pump?

To increase the lifespan of the pump, regularly perform maintenance, avoid running the pump dry, and ensure it is not submerged deeper than its maximum depth. Avoid pumping abrasive materials.

What is the power consumption of the Clarke 7230582 CSV1A pump?

The Clarke 7230582 CSV1A Submersible Water Pump has a power consumption of 400 watts. Ensure your power supply can accommodate this requirement.

Is it possible to use an extension cord with this pump?

Yes, it is possible to use an extension cord with the Clarke 7230582 CSV1A Submersible Water Pump, but ensure the cord is suitable for outdoor use, waterproof, and of sufficient gauge to handle the current without overheating.