Clarke 7120405 ECP20A1 2 Inch Electric Water Instructions

Clarke 7120405 ECP20A1 2 Inch Electric Water Pump manual cover
Pages 16
Year 2022
Language(s)
English en

Clarke 7120405 ECP20A1 2 Inch Electric Water Pump Specification

The Clarke 7120405 ECP20A1 is a robust and efficient 2-inch electric water pump designed for various water transfer applications. This model is engineered to deliver reliable performance, featuring a powerful electric motor that ensures consistent operation. It is equipped with a 230V, 50Hz single-phase motor that provides a maximum output of up to 750 watts, enabling the pump to achieve a maximum flow rate of 216 liters per minute. The pump can handle a maximum head of 8 meters, making it suitable for both domestic and light commercial use.

Constructed with durability in mind, the ECP20A1 boasts a corrosion-resistant body, enhancing its longevity and reliability even in demanding environments. The pump features a 2-inch inlet and outlet size, allowing for efficient water transfer and compatibility with standard hoses and fittings. It is designed with an easy-to-access on/off switch for user convenience and safety.

Safety features include thermal overload protection, which prevents the motor from overheating and extends the lifespan of the pump. The Clarke 7120405 ECP20A1 is compact and lightweight, facilitating easy transportation and installation. Its low noise operation ensures minimal disturbance, making it an ideal choice for residential areas.

This electric water pump is suitable for a range of applications including irrigation, garden watering, and draining water from flooded areas. It is important to note that the pump is designed for clean water usage and is not suitable for pumping abrasive or corrosive fluids. The Clarke 7120405 ECP20A1 offers a balanced combination of performance, durability, and ease of use, making it a valuable addition to any water management system.

Clarke 7120405 ECP20A1 2 Inch Electric Water Pump F.A.Q.

How do I prime the Clarke 7120405 ECP20A1 water pump before use?

To prime the Clarke 7120405 ECP20A1, fill the pump casing with water through the priming port until it overflows. Ensure all connections are tight before starting the pump.

What should I do if the pump does not start when switched on?

Check the power supply and ensure the pump is connected correctly. Verify the circuit breaker is not tripped and the pump is not jammed or blocked.

How often should I clean the inlet filter of the pump?

Inspect and clean the inlet filter every month or more frequently if pumping dirty water to maintain optimal performance.

What maintenance steps should I follow to keep the pump in good condition?

Regularly check for leaks, inspect hoses for wear, clean the inlet filter, and ensure that the pump is dry and stored properly when not in use.

Can the Clarke 7120405 ECP20A1 be used for pumping seawater?

The Clarke 7120405 ECP20A1 is not recommended for use with seawater as it can cause corrosion and damage to the pump components.

How do I troubleshoot if the pump is losing suction?

Check for air leaks in the suction line, ensure the pump is properly primed, and inspect the inlet filter for blockages.

What should I do if the pump overheats during operation?

Turn off the pump and allow it to cool. Check for blockages in the discharge line and ensure adequate ventilation around the pump.

Is the Clarke 7120405 ECP20A1 suitable for continuous operation?

The pump is designed for intermittent use. Continuous operation can lead to overheating and premature wear.

How can I prevent the pump from freezing during winter?

Drain all water from the pump and store it in a dry, frost-free location during winter to prevent freezing damage.

What type of water can the Clarke 7120405 ECP20A1 pump handle?

The pump is suitable for clean water and light wastewater applications but should not be used for abrasive or corrosive fluids.