Clarke 6462135 CPT800 Thicknesser Instructions

Clarke 6462135 CPT800 Planer Thicknesser manual cover

Pages 24

Year 2022

Language(s)

of 24

Clarke 6462135 CPT800 Planer Thicknesser Specification

The Clarke 6462135 CPT800 Planer Thicknesser is a robust woodworking machine designed for precision and efficiency in both planing and thicknessing tasks. Equipped with a powerful 1500W motor, it provides ample power for seamless operation on various wood types. The machine features a maximum planing width of 204mm and a maximum thicknessing capacity of 120mm, accommodating a wide range of woodworking projects. Its two-blade cutter block ensures a smooth and consistent finish, while the feed rate of 6m/min enhances productivity. The CPT800 is engineered with an adjustable depth of cut up to 3mm, allowing for precise material removal. The sturdy construction includes a cast iron base and a durable table surface, providing stability and reducing vibration for enhanced accuracy. Safety is a priority, with the inclusion of a circuit breaker and dust extraction port to maintain a clean working environment. The compact design of the Clarke CPT800 ensures it fits comfortably in smaller workshops without compromising performance. This planer thicknesser is suitable for both professional and amateur woodworkers seeking a reliable and efficient tool for their woodworking needs. Its user-friendly controls and clear measurement scales assist in achieving precise results, making the Clarke 6462135 CPT800 a valuable addition to any woodworking shop.

Clarke 6462135 CPT800 Planer Thicknesser F.A.Q.

How do I set up the Clarke 6462135 CPT800 Planer Thicknesser for the first time?

To set up the Clarke 6462135 CPT800 Planer Thicknesser, first ensure that the machine is placed on a stable surface. Attach the dust extraction port and secure all necessary guards. Adjust the infeed and outfeed tables to align them with the cutter head for optimal operation. Finally, plug the machine into a suitable power source and perform a test run without material to ensure everything is functioning correctly.

What should I do if the planer thicknesser is not turning on?

If the planer thicknesser is not turning on, check to ensure that it is properly plugged into a functioning power outlet. Inspect the power cord for any signs of damage. Verify that the fuse in the plug has not blown and that the machine's safety switch is engaged. If the problem persists, consult the user manual for further troubleshooting steps or contact Clarke customer support.

How often should I change the blades on the CPT800?

Blade replacement frequency depends on the volume and type of material being processed. As a general rule, inspect the blades after every 20 hours of use. If you notice any signs of dullness or chipping, replace the blades immediately to ensure optimal performance and safety.

What is the correct procedure for adjusting the thickness setting?

To adjust the thickness setting on the CPT800, turn the thickness adjustment handle to raise or lower the cutter head to the desired thickness. Use the thickness scale as a guide. Ensure that the material is fed consistently for even thickness across the workpiece.

How can I reduce snipe on the workpieces?

To reduce snipe, ensure that both the infeed and outfeed tables are properly aligned and leveled with the cutter head. Additionally, support longer workpieces at both ends during feeding and maintain a consistent speed when feeding material through the planer.

What maintenance procedures should I regularly perform on the planer thicknesser?

Regular maintenance includes cleaning the machine after each use to remove dust and debris. Lubricate moving parts as recommended in the user manual. Check blade sharpness and replace if necessary. Periodically inspect the drive belt for wear and adjust the tension as needed.

How do I align the infeed and outfeed tables?

To align the infeed and outfeed tables, use a straightedge to ensure both tables are parallel to the cutter head. Adjust the tables by loosening the bolts that hold them in place and carefully moving them until they are aligned. Tighten the bolts once the alignment is correct.

What are the safety precautions when using the Clarke CPT800?

Always wear eye and ear protection while operating the machine. Ensure that loose clothing and hair are secured to prevent entanglement. Never reach over the cutter head while the machine is running. Make sure all guards are in place before use and disconnect the power supply before performing any maintenance.

Can I plane different types of wood with the CPT800?

Yes, the Clarke CPT800 can handle various types of wood, including hardwoods and softwoods. Adjust the feed rate and thickness setting based on the wood type to achieve the best results. Always use sharp blades to ensure a smooth finish.

Why is my planer thicknesser producing uneven cuts?

Uneven cuts can be caused by dull blades, misaligned tables, or inconsistent feed speed. Ensure that the blades are sharp and properly installed. Check the alignment of the infeed and outfeed tables and maintain a consistent speed when feeding material through the machine.