Clarke 2245215 Boxer 14 200p Air Instructions
![Clarke 2245215 Boxer 14 200p Air Compressor manual cover](/images/iUzbLCnLPAnIWzLoTBzOhpgc/thumbs/thumb175x175.webp)
To perform regular maintenance, ensure you check and change the oil every 200 hours of operation, clean the air filter monthly, and inspect the safety valve regularly for proper function.
Check the power supply, ensure the unit is properly plugged in, inspect the fuse or circuit breaker, and verify that the pressure switch is in the 'on' position.
Use soapy water to identify leaks in hoses, connections, and fittings. Tighten any loose components or replace damaged parts to prevent leaks.
Use a high-quality, non-detergent compressor oil with a viscosity grade appropriate for your climate, typically SAE 30 for most environments.
Ensure the compressor is not placed in a confined space, verify that the cooling fins are clean, and check the oil level to ensure proper lubrication.
Turn off the compressor and release any air pressure. Open the drain valve at the bottom of the tank to let the condensate flow out, then close the valve securely.
The circuit breaker may trip due to an overloaded circuit, a faulty motor, or a short circuit. Ensure the compressor is the only appliance on the circuit.
Place the compressor on a rubber mat to dampen vibrations, ensure all components are securely fastened, and consider using a sound enclosure.
The recommended duty cycle is typically 50%, meaning the compressor should run for no more than 30 minutes in an hour to prevent overheating.
Turn off the compressor and release any pressure. Remove the filter cover, take out the old filter, and replace it with a new filter of the same size and type.