Clarke 2083180 SE25C200 Industrial Electric Instructions

Clarke 2083180 SE25C200 Industrial Electric Compressor manual cover
Pages 16
Year 2016
Language(s)
English en

Clarke 2083180 SE25C200 Industrial Electric Compressor Specification

The Clarke 2083180 SE25C200 is an industrial-grade electric compressor designed for demanding environments where high performance and reliability are prerequisites. This compressor features a robust 200-liter air receiver, providing ample storage capacity for continuous operations. It operates with a 5.5 horsepower motor, which ensures efficient and powerful performance for various industrial applications. The SE25C200 is engineered with a twin-cylinder pump, enhancing its ability to deliver consistent high-pressure output, suitable for powering pneumatic tools and machinery.

With a maximum pressure of 145 psi (10 bar), this compressor meets the requirements of heavy-duty tasks, supporting both high-volume and high-pressure needs. The unit is powered by a three-phase electrical supply, making it compatible with most industrial power systems. Its cast-iron construction ensures durability and longevity, making it a reliable choice for long-term usage in demanding settings.

The compressor is equipped with an automatic pressure cut-out switch for safety and operational efficiency, preventing over-pressurization and reducing wear on components. Its design incorporates easy access to service points, simplifying maintenance and servicing, which is crucial for minimizing downtime. Additionally, the unit is designed to operate at low noise levels, contributing to a more comfortable working environment.

Overall, the Clarke 2083180 SE25C200 Industrial Electric Compressor is an ideal solution for businesses requiring a powerful, durable, and efficient air compressor capable of withstanding the rigors of industrial use. With its combination of high performance, safety features, and ease of maintenance, it stands out as a dependable tool in any industrial setting.

Clarke 2083180 SE25C200 Industrial Electric Compressor F.A.Q.

How do I safely start the Clarke 2083180 SE25C200 Industrial Electric Compressor?

Ensure the compressor is on a stable surface. Check that the power supply is compatible. Turn the switch to the 'ON' position and allow the compressor to reach operating pressure before use.

What is the recommended maintenance schedule for this compressor?

Perform weekly checks for oil levels, air filter cleanliness, and inspect for any air leaks. Schedule a full service every 6 months, including oil change and belt inspection.

How can I troubleshoot if the compressor does not start?

Check the power supply and ensure the plug is connected properly. Inspect the fuse or circuit breaker and replace if necessary. Verify that the pressure switch is not stuck in the 'off' position.

What should I do if the compressor is making unusual noises?

Stop the compressor immediately. Check for any loose parts or bolts. Inspect the motor and pump for damage. If the issue persists, consult a professional technician.

How do I drain the tank to remove accumulated moisture?

Turn off the compressor and release the pressure. Open the drain valve at the bottom of the tank and let the moisture flow out completely. Close the valve securely after draining.

What type of oil should be used in the compressor?

Use a high-quality, non-detergent air compressor oil. Refer to the user manual for the recommended grade and type for the Clarke 2083180 SE25C200.

How can I improve the efficiency of the compressor?

Ensure regular maintenance is performed. Keep the air filter clean and replace it when necessary. Check for air leaks and fix them promptly to maintain efficiency.

What is the maximum operating pressure of the SE25C200 compressor?

The maximum operating pressure is 145 psi (10 bar). Always monitor the pressure gauge during operation to avoid exceeding this limit.

How do I replace the air filter on the Clarke 2083180 SE25C200?

Turn off the compressor and disconnect it from the power source. Remove the air filter cover, take out the old filter, and replace it with a new one. Secure the cover back in place.

What should I do if the compressor overheats?

Turn the compressor off and allow it to cool down. Check for obstructions in the ventilation areas and ensure adequate airflow around the unit. If overheating persists, have the unit checked by a technician.