Clarke 1499505 Airmaster Tiger 11 550 Air Instructions

To set up the Clarke 1499505 Air Compressor, place it on a stable and level surface. Connect it to a power source with the appropriate voltage, check the oil level, and ensure all connections are tight. Refer to the user manual for detailed instructions.
Perform a daily check of oil levels, drain the tank weekly to prevent moisture buildup, and clean the air filter monthly. Inspect all hoses and connections regularly for wear and tear.
Ensure the power cord is properly plugged in and the fuse or circuit breaker is not tripped. Check the pressure switch is set correctly and inspect for any visible damage or loose connections.
Use SAE 30 compressor oil or a synthetic equivalent to ensure optimal performance and longevity of the compressor.
Check for leaks in the tank or hoses, ensure the drain valve is closed, and inspect the pressure switch and intake valve for blockages or malfunction.
Turn off and unplug the compressor. Remove the cover to access the air filter, take out the old filter, and replace it with a new one of the same type. Secure the cover back in place.
Turn off the compressor immediately and let it cool down. Check for obstructions in the cooling vents, ensure proper ventilation, and verify that the duty cycle is not being exceeded.
Regular maintenance such as oil changes, air filter replacements, and draining the tank can extend the compressor's lifespan. Avoid overloading the compressor and ensure it is used within its rated capacity.
Wear appropriate personal protective equipment, ensure the compressor is on a stable surface, and do not exceed the recommended pressure levels. Always disconnect the power before performing maintenance.
Turn off the compressor and release any pressure in the tank. Open the drain valve located at the bottom of the tank to allow moisture to escape, then close it securely after draining.