Clarke 114060 Airmaster Tiger 5 12 Air Instructions

To set up the compressor, ensure it is placed on a stable, level surface. Connect the air hose securely to the outlet. Check the oil level and fill if necessary. Plug the compressor into a proper power source, and adjust the pressure regulator to the desired level before use.
It is advised to check the oil level weekly, drain the air tank after each use to prevent moisture build-up, and clean or replace the air filter monthly. Additionally, conduct a thorough inspection every six months.
Ensure that the power switch is turned on and the unit is plugged into a working outlet. Check the circuit breaker and reset if necessary. Examine the pressure switch and motor for any faults. If issues persist, consult the user manual or contact customer support.
Check for any leaks in the hose or connections. Verify that the pressure regulator is set correctly. Inspect the air filter for blockages and clean or replace if needed. Ensure the tank drain valve is fully closed.
This may occur due to overheating. Ensure the compressor is in a well-ventilated area and not overloaded. Check the thermal overload protection and allow the unit to cool down before restarting.
Turn off the compressor and unplug it. Locate the air filter cover, unscrew it, and remove the old filter. Insert a new filter and reattach the cover securely.
Use SAE 30 non-detergent compressor oil. Regularly check the oil level and change it every 100 operating hours or as recommended in the user manual.
Place the compressor on a rubber mat to dampen vibrations. Ensure that it is on a stable surface and that all components are tightly secured. Consider using a sound enclosure if noise levels are still high.
Turn off the compressor immediately and allow it to cool. Check for obstructions in the ventilation openings. Ensure the compressor is not running for longer than its duty cycle allows.
Yes, the Clarke 114060 Airmaster Tiger 5 12 Air Compressor can be used for painting tasks. Ensure that the pressure and airflow settings meet the requirements of your spray gun.