Citizen J250 Abbreviated Instructions
![Citizen J250 Watch manual cover](/images/lAdGvrYniXJMbApZudhwOtBa/thumbs/thumb175x175.webp)
To set the time and date on your Citizen J250 watch, pull the crown out to the first click to set the date and to the second click to set the time. Rotate the crown clockwise to adjust the date and counterclockwise to adjust the time. Push the crown back in when finished.
If your Citizen J250 watch stops working, first check if the battery needs replacement. If the battery is fine, ensure the watch is not exposed to extreme temperatures or magnetic fields. If the issue persists, contact Citizen customer support for professional assistance.
To clean your Citizen J250 watch, use a soft cloth to wipe the case and band. For stubborn dirt, use a damp cloth with mild soap, then dry thoroughly. Avoid immersing the watch in water unless it is water-resistant.
To change the battery in your Citizen J250 watch, it is recommended to have it done by a professional watch technician to avoid damage. However, if you choose to do it yourself, use a small screwdriver to open the case back and replace the old battery with a new one of the same type.
The water resistance level of the Citizen J250 watch varies by model. Typically, it is designed to withstand water splashes, but not suitable for swimming or diving unless specified. Always check the case back for water resistance markings.
To adjust the strap on your Citizen J250 watch, use a spring bar tool to remove links from the bracelet or adjust the pin buckle on a leather or fabric strap. For complex adjustments, visit an authorized service center.
If the hands of your Citizen J250 watch are misaligned, pull the crown out to the second click and rotate until the time is set correctly. If misalignment persists, seek assistance from a professional watchmaker.
Yes, you can replace the glass on your Citizen J250 watch. It is recommended to have it replaced by an authorized service center to ensure water resistance and case integrity are maintained.
To use the chronograph on your Citizen J250 watch, press the top pusher to start and stop the chronograph. Press the bottom pusher to reset it. Make sure the crown is pushed in during operation.
Store your Citizen J250 watch in a cool, dry place, preferably in a watch box or a padded container. Avoid placing it near electronic devices or magnets to prevent any potential interference.