Citizen H060 Abbreviated Instructions
![Citizen H060 Watch manual cover](/images/GwwvrtEeqxuxNajMAlotciaJ/thumbs/thumb175x175.webp)
To set the time on your Citizen H060, pull the crown out to the time setting position, rotate the crown to adjust the time, and then push the crown back in to its normal position.
If your watch stops, it may be due to a depleted battery. Consider exposing it to light to charge the Eco-Drive system. If the problem persists, consult a certified service center.
To adjust the calendar, pull the crown to the first position and rotate to set the correct date. Make sure to set it to the day before the current date, then advance the time until the date changes to the correct day.
Ensure that the watch is exposed to sufficient light. If it still does not charge, check for any obstructions on the solar panel and ensure it is clean.
After replacing the battery, perform an all-reset operation by pulling the crown out to the time setting position and pressing the buttons simultaneously to reset the system.
The Citizen H060 is water-resistant to a certain depth. Check the specific water resistance rating engraved on the back of your watch and ensure that the crown is fully secured before swimming.
To correct the day of the week, pull the crown to the first position and rotate it clockwise until the correct day is displayed.
It is recommended to have your Citizen H060 watch serviced every 3-5 years to ensure optimal performance.
Use a soft, dry cloth to clean the watch. For more thorough cleaning, use a damp cloth and mild soap, avoiding direct contact with water, especially on leather bands.
To synchronize the chronograph hand, pull the crown to the time setting position and press the buttons to adjust the chronograph hand to the 12 o'clock position.