Chrysler 200 Convertible 2014 Owner's Manual
![Chrysler 200 Convertible 2014 Sedan manual cover](/images/mWQhwNKZdolGENHeQIXNxsXS/thumbs/thumb175x175.webp)
To reset the TPMS on a 2014 Chrysler 200 Convertible, inflate all tires to the recommended pressure, then drive the car at or above 15 mph for at least 10 minutes to allow the system to update.
For the 2014 Chrysler 200 Convertible, it is recommended to use 5W-20 full synthetic oil for optimal engine performance and protection.
It is advisable to change the transmission fluid every 60,000 miles for the 2014 Chrysler 200 Convertible to ensure smooth operation and longevity of the transmission.
To replace a headlight bulb, open the hood, locate the back of the headlight assembly, twist and remove the bulb holder, replace the bulb, and reassemble in reverse order.
Check engine light can signal various issues. Use an OBD-II scanner to read error codes, which can help identify specific problems such as a faulty oxygen sensor or loose gas cap.
Common causes of stalling can include a dirty throttle body, faulty crankshaft position sensor, or issues with the fuel delivery system. Regular maintenance and diagnostics can help prevent stalling.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, keep tires properly inflated, and avoid aggressive driving behaviors.
Regular maintenance includes oil changes every 7,500 miles, tire rotations every 7,500 miles, brake inspections every 20,000 miles, and transmission fluid changes every 60,000 miles.
To operate the convertible top, ensure the vehicle is in Park, press and hold the convertible top switch located on the overhead console until the top is fully up or down.
Rough idle can be caused by dirty fuel injectors, a faulty idle air control valve, or spark plug issues. Cleaning or replacing these components can help resolve the issue.