Chrysler 200 2014 Owner's Manual
![Chrysler 200 2014 Sedan manual cover](/images/YQLGahiSMeZcXHCEJMhucAvP/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, inflate all tires to the recommended pressure. Drive the vehicle at speeds above 15 mph for at least 10 minutes. The system should automatically reset.
The recommended oil type for the 2014 Chrysler 200 Sedan with a 2.4L engine is 5W-20, and it has an oil capacity of approximately 4.5 quarts, including the filter.
To pair your smartphone, enable Bluetooth on your phone, press the Uconnect button on the touchscreen, select 'Phone Settings', then 'Add Device'. Follow the prompts on both your phone and the Uconnect system to complete pairing.
If your engine overheats, safely pull over and turn off the engine. Allow it to cool before checking coolant levels. Refill if necessary and inspect for leaks or damaged hoses. Seek professional assistance if the issue persists.
To replace the cabin air filter, open the glove box and remove the dampener arm. Push the sides of the glove box inward to release it. Remove the filter cover behind the glove box and replace the old filter with a new one. Reassemble in reverse order.
Signs that you may need a new battery include slow engine crank, dim headlights, electrical issues, and a battery warning light on the dashboard. It's advisable to have the battery tested if you experience these issues.
Check if the A/C system is set to 'cool' and the fan is on. Inspect the refrigerant level and ensure there are no leaks. If the issue persists, it may require professional diagnostics to check the compressor and electrical connections.
To jump-start, connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the donor battery. Connect the negative cable to the negative terminal of the donor battery and the other end to a grounded metal surface on the dead vehicle. Start the donor vehicle, then the Chrysler 200.
The 2014 Chrysler 200 typically uses a sealed transmission system, which means it doesn't have a traditional dipstick for checking fluid levels. It's recommended to have a professional check the fluid level and condition during regular maintenance.
The spark plugs in a 2014 Chrysler 200 should typically be replaced every 30,000 to 100,000 miles, depending on the type of spark plugs used. Consult the owner's manual for the specific recommendation for your vehicle model.