Chicco I Feel Owner's Manual

To assemble the Chicco I Feel Rocker, start by connecting the frame pieces as per the manual, ensuring all parts click into place securely. Attach the seat fabric by sliding it over the frame and securing it with the straps provided. Finally, attach the toy bar if desired.
The Chicco I Feel Rocker is designed to support infants and toddlers up to 20 pounds (approximately 9 kilograms).
To clean the Chicco I Feel Rocker, remove the fabric cover and hand wash it with mild soap and warm water. The frame can be wiped down with a damp cloth. Ensure all parts are completely dry before reassembling.
The Chicco I Feel Rocker has multiple recline positions. To adjust, locate the recline mechanism at the back of the seat and lift or lower the backrest to the desired position, ensuring it locks into place securely.
While the Chicco I Feel Rocker can be used for short naps under supervision, it is not recommended for prolonged sleeping as it does not provide a flat sleeping surface.
If the rocker does not move smoothly, check for any obstructions in the rocking mechanism and ensure the frame is assembled correctly. Lubricate moving parts with a silicone-based lubricant if necessary.
To attach the toy bar, align the ends of the bar with the slots on either side of the rocker frame and push until you hear a click, indicating it is securely in place.
When not in use, fold the Chicco I Feel Rocker by collapsing the frame as per the instructions. Store it in a dry place away from direct sunlight to prevent fading and wear.
The Chicco I Feel Rocker is suitable for newborns and comes with a supportive headrest to ensure comfort. Always use the safety harness to secure the baby.
If the vibration feature is not working, check the battery compartment to ensure batteries are installed correctly and have sufficient charge. Replace batteries if needed. If the issue persists, contact Chicco customer support.